Zhejiang THOR Electric Co., Ltd |
|
Fast Ethernet network protector Network camera dedicated Network professional surge protector
Model: Trss-rj11 / 45
colour:white
Authentication:CE ECM
Product introduction
TRSS-RJ45/8 type network lightning arrester is used on the
RJ45 interface of the LPZ2- LPZ3 partition interface to protect
Ethernet computers, servers, switches, routers and other network
devices. The network surge protector is suitable for lightning
strikes or other surge protection of network devices such as
SWITCH, HUB, ROUTER and computers of six types of wiring systems.
It has the characteristics of large flow capacity, low residual
pressure level, sensitive reaction, stable performance and reliable
operation.
Working principle of product
The network arrester can effectively protect the
power equipment. Once the abnormal voltage appears, the lightning
arrester will play a protective role. When the protected device is
running under normal working voltage, the arrester will not work,
and it will be regarded as a circuit for the ground. Once the high
voltage is present and the insulation of the protected equipment is
endangered, the lightning arrester acts immediately and leads the
high voltage impact current to the earth, thus limiting the
amplitude of the voltage and protecting the insulation of the
electrical equipment. When the overvoltage is gone, the arrester is
restored to its original state quickly, so that the system can
supply electricity normally. The main function of the lightning
arrester is to reduce the voltage value of the protected equipment
through the action of parallel discharge gap or nonlinear
resistance, and to reduce the voltage value of the protected
equipment, so as to protect the power equipment.
Product features
1. The core components are strictly screened, the
performance is stable, and the work is reliable.
2. The extremely low online resistance reduces unnecessary
attenuation of signal intensity and increases
the distance of signal transmission to the maximum.
3. Advanced production technology and beautiful appearance
4. Product multi interface is easy to use, and it doesn't need to worry about the number of interfaces.
5. The upgraded triode is equivalent to 2 diodes
Product specification
Model and specofocation | TRSS-RJ45/4 | TRSS-RJ45/8 | |||||
Rated Operating Voltage | Un | 5V/12V | |||||
Max continuous operating voltage | Uc | 6V/15V | |||||
Voltage protective level | Up(V)〈 | 40/60 | |||||
Max discharge current | Imax(8/20μS) | 5kA | |||||
Nominal discharge current | In(8/20μS) | 3kA | |||||
Response time | ns | ≤1 | |||||
Adaptive date transfer rate | 100Mbps | ||||||
Insertion loss | ≤0.3dB | ||||||
Configuration dimension | 104×25×25 | ||||||
Protective circuit | 1.2.3.6 | 1.2.3.4.5.6.7.8 | |||||
Operating condition | Temp:-40℃~+70℃ | ||||||
RH≤95%(25℃) | |||||||
Sea level elevation≤3km | |||||||
Remarks | Other max continuous operating voltage can be customized |
Use of attention
1. Connect the grounding wire of the lightning protector to
the ground wire of the lightning protection system.
2. The lightning arrester of the network switch
is a series connection mode.
3. Please choose the network switch lightning
protector that is the same as the protected device's interface
type.
4. The lightning protector of the network switch
should match the working voltage of the protected device. When
installing, please connect according to the installation sketch
map.
Company profile
Thor has been designing new products to meet the RoHS
directive since 2006. Thor’s ongoing commitment to RoHS compliance
includes continuing efforts to reduce the presence of hazardous
substances in the design and manufacture of a growing number of
popular products.
We are committed to meet the requirements of the EU waste
electrical and Electronic Equipment Directive. This Directive
requires manufacturers of electrical and electronic equipment to
put their products back into the EU market after 2005, and then use
them or recycle them.