Active Member
|
[China]
Address: China Zhejiang Wenzhou Economic Development Zone
Contact name:
Zhejiang THOR Electric Co., Ltd |
|
|
Special power supply cabinet lightning protection socket 8 Aluminum Alloy switch socket
Brief introduction
PDU series cabinet socket type power protection
lightning protection device has the function of lightning
protection protection widely used in electronic equipment and
electronic appliances. It effectively absorbs the surge pulse from
the power supply system, so that the office and household
appliances will not be infringed by the surge current and reduce
the probability of lightning damage under lightning ring.
Product features
1. the new multi-purpose standard socket, loose and
reasonable hole seat clearance can meet the lightning protection
needs of many different electrical equipment at the same time.
2. the inner sleeve is made of all phosphorus bronze
strip, with good conductivity and elasticity.
3. protect users or children, prevent electric shock,
prevent dust and debris from entering idle sockets.
Product specification
| Model | TRS-PDU | |
| Rated Operating Voitage | UC | 250V～ |
| Voltage protective level | Up(KV)≤ | 1.0 |
| Max discharge current | Imax(KA) | 6 |
Nominal discharge current
| In(KA) | 3 |
| Protection mode | L-N | |
| technical parameter | MAX2.5KW-MAX10A | |
Working principle of product
The surge protector of PDU lightning protection socket
is very high when no voltage is needed, which is equivalent to
breaking circuit. When the voltage occurs, the impedance drops to a
few Europe, and the surge current will flow through the surge
protector and will not enter the device. At the same time, because
the surge protector has a small impedance at this time, the voltage
on both sides of the surge is relatively small, and because he is
in parallel with the protected equipment, it prevents the equipment
from suffering from large surge power. Pressure, so as to play the
effect of discharge and pressure limiting.
Use of attention
1. the load power of lightning protection socket should
not exceed the rated power of lightning protection socket.
2. ensure that the grounding wire is reliably connected
before the power supply is re connected
3. when multiple plugs are inserted at the same time, the
total power load should not exceed the maximum allowable power.
Company profile
Incorporated in 2006, Zhejiang Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.
