Zhejiang THOR Electric Co., Ltd |
|
Patchboard cabinet for lightning protection surge PDU8 Aluminum Alloy switch socket
Product introduction
PDU series of battery cabinet type power protection
lightning protection device can quickly absorb lightning and surge
pulse of power supply system, so that office buildings and
household appliances will not be infringed by surge current, reduce
the probability of damage by lightning in lightning environment,
and protect the safety of equipment.
Use of attention
1. when the ground wire end connected to the lightning
protection socket meets the requirements, the plug plug can be
inserted directly; otherwise, the grounding terminal of the
lightning protection socket must be connected with the ground net
to use. In order to achieve better lightning protection effect, it
is recommended that the earthing terminals of the lightning
protection socket be reliably connected to the grounding grid.
2. lightning protection socket should be checked regularly
and check whether the indicator is working normally.
3. lightning protection socket frame type lightning
protection socket press the power switch button, the grounding
indicator light (yellow), indicating that the ground is reliable;
the working light is bright (green), indicating the normal work of
the lightning protection module; the power indicator light is
bright (red), indicating the normal connection of the power supply.
Product features
1. when the liquid on the socket is carelessly
sprinkled, it can flow out through the diversion channel to ensure
the safety of the equipment.
2. the inner sleeve is made of all phosphorus bronze
strip, with good conductivity and elasticity.
3. built in thermal coupling element to monitor its
lightning protection efficiency, and the failure of surge
protection does not affect power supply.
Product specification
Model | TRS-PDU | |
Rated Operating Voitage | UC | 250V~ |
Voltage protective level | Up(KV)≤ | 1.0 |
Max discharge current | Imax(KA) | 6 |
Nominal discharge current
| In(KA) | 3 |
Protection mode | L-N | |
technical parameter | MAX2.5KW-MAX10A |
Working principle of product
The surge protector of PDU lightning protection socket
is very high when no voltage is needed, which is equivalent to
breaking circuit. When the voltage occurs, the impedance drops to a
few Europe, and the surge current will flow through the surge
protector and will not enter the device. At the same time, because
the surge protector has a small impedance at this time, the voltage
on both sides of the surge is relatively small, and because he is
in parallel with the protected equipment, it prevents the equipment
from suffering from large surge power. Pressure, so as to play the
effect of discharge and pressure limiting.
Company profile
Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643-1.