|
[China]
Trade Verify
Address: Building 5, TEDA Raycom Park, No.12 Zhu Yuan Road, Tianzhu Free Trade Zone Shunyi, 101312, Beijing, China
Contact name:Hu
SINO AGE DEVELOPMENT TECHNOLOGY, LTD. |
|
Verified Suppliers
|
|
|
Digital Rubber Hardness Tester Shore A/C/D
Shore digital rubber hardness tester is designed for testing the hardness of soft rubber, printer roller and other elastomer material.(ASTM--D--2240). It has advantages of simple structure, convenient use, small body and light weight, intuitive readings. It can carry the hand-held measurements and can also be installed on the same type of fixed cradle which is matched with the set load test.
Introduction
Shore rubber durometer is a type of vulcanized rubber and plastic product . It has A , D , and C types.
A and D type apply to the test of low and medium hardness and high hardness material C type is suitable for 50% condensation, 0.049MPa Stress , use rubber and plastic togerther, rubber include the shoes cellual material .
The durometer carry out the provision of GB/T531-99, GB2411-80, HG/T2489-93 and JJG304-2003.
Key feature
Simple structure
Very convenient to use
Easy to carry
ON/OFF Switch
Holding measured display values
Zero setting
Power Supply: one 1.5 V cell battery
Used to test sof t rubber, prnter roller and other elastomer
materials
Specification
| Model | Shore A | Shore C | Shore D | ||
| Measuring range | 0-100HA | 0-100HC | 0-100HD | ||
| Resolution | 0.5HA | 0.5HC | 0.5HD | ||
| Accuracy | ±1HA | ±1HC | ±1HD | ||
| Force | 0.55-8.06N | 0-44.5N | |||
| Applications | general rubber, synthetic rubber, soft rubber, poly-resin, leather, wax, etc. | rubber and contains the tiny hole material that that the vesicant is made in being used for plastic | general hard rubber, hard resin, acryl, glass, thermoplastics, printing plates, fibres, etc. | ||
| Indenter shape | Flat cone point 0.79mm 35º Included Angle | Spherical SR2.5mm | Sharp cone point SR 0.1mm 30º Included Angle | ||
| Tip stroke | 2.5mm | Net weight | 0.5kg | ||
Key Parameter
Graduation : 0-100 degree
Indentor running : 0-2:5mm
Indentor press on telos : A , C type 0.55N-8.06N, D type0-44.5N
