|
[China]
Trade Verify
Contact name:Charlene Hsu
Fuan Acepow Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
1. Specification of 1.6w ULP Ultra low power foldable portable solar panel
| Model | Monocrystalline silicon ultra low power Solar panel 3w/6v |
| Working Model | 2*6pcs series connectioin |
| Output Power | 3.0 ± 0.2W |
| Working Voltage(with cable Vm) | Vm ≥ 5.75V |
| Working Current(with cable Im) | Im ≥ 520mA |
| Open circuit Vol. | Voc ≥ 6.9V |
| Short circut Current(Isc) | Isc ≥ 560mA |
| Conver efficient | ≥19.8% |
| Module Size | 169*115.7*2.3mm |
| Panel with housing Size | 172*120*14mm |
| Gross Weigth | 0.2KG |
| Cable | White, Diameter 24AWG, length:3m , MICRO or Type-C connection at the end, or other customized connector |
| EVA | 0.4mm/0.45mm |
| Frosted PET | 0.2mm |
| Photovoltaic welding zone | 0.08*0.8mm |
| Black adhesive zone | width 4.0mm |
| PCB Module | 1.0mm Fiberglass board |
2.Test environment(STC) of 5w ULP Camera solar panel foldable portable solar panel
1. The Sample is tested by standard PV module tester
2. spectral energy: 1KW/㎡,
3. Air pressure:AM=1.5
4. Temperature: 25℃
3. Advantages of 3w ULP Camera solar panel foldable portable solar panel
(1) IP64
(2) Ultra low power
(3) High conversioin efficiency
4. Power testing of 3w ULP Camera solar panel foldable portable solar panel
1. Turn the light same as customers requirement enviroment.
2. Using electronic load meter to test ULP portable solar panel with cable. When Voltage=5.0V, output≥ 1.6w, then it’s qulified.
3. The light intensity is corrected every 2 hours.
5. Standard methods of testing the electrical performance of 3w ULP Camera solar panel
1. Mainly test the output power.
2, Solar radiation intensity :1000W/ ㎡or as customers’ requirement
3, temperature : 25℃, humidity :10 ~ 90%.
Air Quality: AM1.5
FAQ
Q: Does OEM OR ODM accepted?
A: Yes, OEM and ODM are available.
Q: Can I order a sample to check the quality?
A: Yes, sample order is welcomed.
Q : Can your products’ label, packaging, design be customized?
A : Yes, we offer customization service on these.
Q : What is your minimum order quantity?
A : Normally MOQ 100pcs, but we also accept small sample order for
quality clients.
Q : Can I get a sample for quality check?
A : Yes, we offer sample.
Q : How soon is the lead time?
A : For sample order, 5-10 days. For mass order, 30 days.
