|
[China]
Trade Verify
Address: R202, 2F, No.1 block, WeiTai Industrial Park, No.1 WeiTai Rd, Shiyan, Bo'an, Shenzhen, P.R.China, 518101
Contact name:Hung Sam
Hung-Kee (China) Electronic Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Sidestream Anesthesia gas module anesthetic gas analyzer monitor anesthetic gas analyzer ICU cardiac monitor
Sidestream Anesthesia Multi-function Gas Module SAG-05
Sidestream Anesthesia Gas Module Quick Details:
Sidestream Anesthesia Gas Module, simultaneously measure the concentration waveform and data of carbon dioxide, nitrous oxide and anesthetic gas, as well as respiratory rate. The types of anesthetic gas measured include halothane, enflurane, isoflurane, sevoflurane and desflurane. The user can manually select the type of anesthetic gas. This mainstream anesthesia gas module SAG-05 is perfect matched with our 15 inch ICU cardiac monitor or Cardiac patient monitor.
1) The host monitor only needs to have a standard Remo socket (8-pin) and an inside serial port without the need of extra space and circuit.
2) The user can easily select the anesthetic gas to be monitored, and the Module indicates the selected anesthetic gas.
3) Advanced designs on hardware and software to ensure the Module to be sturdy and durable, with very low noise level.
4) Low power assumption suitable for use with battery powered monitors.
5) Barometric pressure automatic compensation to ensure the measurement accuracy within a wide pressure range of 400-860 mmHg.
6) Patented moisture filter with bacteria control, a very low dead space, and cost-effective.
7) Low cost Oxygen sensor can be cooperative used and oxygen concentration measure can be realized easily.
8) Comprehensive OEM solutions: multiple communication protocols to make the Module compatible with your patient monitors.
Hung-Kee Anesthesia Gas Module brochure 2022.11.pd...
Sidestream Anesthesia Gas Module Technical details:
| Temperature | -5~50℃ |
| Relative humidity | 10-90%(Non-condensing) |
| Atmospheric pressure | 55-115kpa |
| Power consumption | 150ma |
| Port and protocol | RS-232/ Standard E-8-1,38.4 kBaud,10 ms data interval (KM) or Customized according to customers' requirements |
| Co2 Measuring Range | 0~150mmHg |
| Accuracy | 0~40mmHg, inaccuracy≤± 2mmHg； 41~70mmHg, inaccuracy≤±5% of Reading； 70~100mmHg, inaccuracy≤± 8% of Reading； 101~150mmHg, inaccuracy≤±10% of Reading； |
| N₂O | |
| Measuring range | 0~100% |
| Inaccuracy | ±(2vol%+ 2% of Reading) |
| HAL, ENF, ISO | |
| Measuring range | 0-12% |
| Inaccuracy: | For 0~8%, ±(0,2 vol% + 5% of Reading) |
| For 8~12% | Unspecified |
| SEV | |
| Measuring range | 0~15% |
| Inaccuracy: | For 0~10%,±(0,2 vol%+5% of reading) |
| For 10~15% | unspecified |
| DES | |
| Measuring range | 0~25%； |
| Inaccuracy: | For 0~18%,±(0,2 vol%+5% of reading); For 18~25%, unspecified. |
| Respiration Rate Range | 2~150 t/min |
| Inaccuracy | the bigger value of ±1% or 1t/min |
Sidestream Anesthesia Gas Module Description:
Our Anesthetic Gas Detector/Module can simultaneously measure the concentration waveform and data of CO2, N2O,anesthetic gas, as well as respiratory rate. The types of anesthetic gases measured include halothane, enflurane, isoflurane, sevoflurane and desflurane. The user can manually select the type of anesthetic gas.
The Module is based on the principle that different gases absorb the infrared of a particular wavelength. For examples, CO2 sensitive wavelength is 4.26 um, N2O sensitive wavelength is 4.5 um, and the sensitive infrared wavelengths of the five anesthetic gases distribute between 7.5-10.5 um. We can choose one wavelength as reference which is not sensitive to these gases. When the concentration of the monitored gas changes, its absorbed dose of the sensitive infrared varies accordingly, but the reference infrared does not change. The Module employs a four-channel sensor, with every channel having an optical filter that only allows a narrow band wavelength to pass through, and the central wavelength passing through each optical filter is different. Take CO2 for example, when one beam of infrared passing through sampling gas with CO2 molecule reaches infrared sensor, the CO2 channel measures the residual infrared signal, while the reference channel measures initial infrared, then we use standard gas with known CO2 concentration to calibrate the specific ratio between the two channel signal, then store the calibrated parameter into the internal storage and then we can measure CO2 concentration in the rated range. Likewise, the principles for measuring the N2O and selected anesthetic gas concentrations are same.
Sidestream Anesthesia Gas Module Accessory:
Multi-gas filter, sampling tube, nasal oxygen tube
FAQ for Sidestream Anesthesia Gas Module:
1. Q: When do you delivery?
A: Usually in 7-30 days depends on the order qty and available of
some specific parts.
2.Q: Do you work on OEM and SKD project?
A: Yes, we have more than 14 years experience on OEM and SKD
service, full assembling procedure will be provided, and detailed
guidance of local assembling work will be offered.
3.Q: Where is your company located?
A: Our company is located in Shenzhen city, very near from Hongkong(about one and half hours)
4. Q: Do you have after-sales service?
A: Of course, every product we sell has after-sales service. If there is any problem with the product, you can tell us, and we will try our best to solve your problem.
5. Q: Can I order a sample?
A: Sure, delivery sample by global express in charge.
6.Q: Are you trading company or manufacturer?
A: We are factory which has over 14 years' manufacturing experience.
7.Q: What's the MOQ?
A: 1 unit.
8.Q:Do your products support customization?
A: Yes
9.Q: What is the MOQ for your products?
A: The minimum order quantity of our products is 1 unit/pc.
10. Q: Can I get a discount?
A: According to the quantity of products you need to buy, we will give corresponding discounts, please consult our sales manager for specific discounts.
