Changsha Power Electric Co.,Ltd. |
Verified Suppliers
|
|
Professional F Neck ANSI 57-2 305mm height Line Post Porcelain
Insulators
Description:
Line post porcelain insulators shall conform in all respects to the
requirements of ANSI standard. The insulators shall be made of good commercial-grade
wet-process porcelain.The entire surface of the insulator, with the exception of a firing
surface, shall be glazed. If gray is required, it shall be in
accordance with ANSI Z55.1-1967 (R1973). Metal parts shall be made of a good commercial grade of malleable
iron, ductile iron, steel, or aluminum. Ferrous parts, other than
stainless steel, shall be galvanized in accordance with ASTM A153.
Specifications:
型号 | 图号 | 主要尺寸(mm) | 爬电距离 (mm) | 雷电冲击耐受电压(kV) | 工频湿闪络电压(kV) | 弯曲破坏负荷(kN) | 底座中心螺孔 | |
H | D | |||||||
PS-15/300 | 2 | 224 | 115 | 300 | 105 | 40 | 3 | M16 |
PS-15/500 | 1 | 283 | 120 | 360 | 105 | 40 | 5 | M16/M18/M20 |
PSN-95/8ZS | 1 | 222 | 145 | 350 | 95 | 38 | 8 | M20 |
PSN-125/8ZS | 1 | 305 | 150 | 530 | 125 | 50 | 8 | M20 |
PSN-170/8ZS | 1 | 370 | 160 | 720 | 170 | 70 | 8 | M20 |
PS-150/12.5Z | 2 | 336 | 170 | 534 | 150 | 65 | 12.5 | / |
PS-170/12.5ZS | 1 | 370 | 170 | 580 | 170 | 70 | 12.5 | M20 |
PS-200/12.5ZS | 1 | 430 | 180 | 620 | 200 | 85 | 12.5 | M20 |
PS-250/12.5ZS | 1 | 510 | 190 | 860 | 250 | 95 | 12.5 | M20 |
PS-325/12.5ZS | 1 | 660 | 200 | 1200 | 325 | 140 | 12.5 | M24 |
PSN-95/12.5ZS | 1 | 222 | 165 | 350 | 95 | 38 | 12.5 | M20 |
PSN-125/12.5ZS | 1 | 305 | 170 | 530 | 125 | 50 | 12.5 | M20 |
PSN-170/12.5ZS | 1 | 370 | 180 | 720 | 170 | 70 | 12.5 | M20 |
PSN-200/12.5ZS | 1 | 430 | 190 | 900 | 200 | 85 | 12.5 | M20 |
PSN-250/12.5ZS | 1 | 510 | 200 | 1140 | 250 | 95 | 12.5 | M20 |
PSN-325/12.5ZS | 1 | 660 | 210 | 1450 | 325 | 140 | 12.5 | M24 |
Applications:
ANSI 57-2S Line post insulators are designed to provide rigid
support of conducting cable while offering the maximum resistance
to damage from electrical or mechanical events. Horizontal and gain-base line post insulators are often used in
applications to avoid the need to install a cross-arm on the
pole.
Features:
Our porcelain insulators are manufactured using a wet porcelain
process and cured in an environmentally controlled production
facility to ensure a complete and even cure of the porcelain while
also resulting in the highest quality surface finish.
Pre-sales service:
Choose the proper reactor type
Installation recommendations and to provide technical information
Satisfied users of the special design requirements
After-sales service:
Offer professional equipment installation instructing
Provide spare parts for wearing parts(such as post insulator, bolt, etc.)