Shijiazhuang Aoge Polyurethane Products Co., Ltd. |
|
Application:
This product is suitable in the machineries for spinning, vehicle,
chemical fiber,
tobacco, paper making, printing, diesel engines, weaving and
chemicals.
In recent years, the demands form mining, metallurgy, iron
machinery and
hospital equipment are increasing day by day.
1) material: chloroprene rubber, and elastic nylon cloth,
fiberglass, or kevlar
2) Max. width: 450mm
3) long service life
4) high strength, anti oil, heat, aging
5) good bending resistant performance
Product Introuction:
Timing belt drive consists of an endless belt whose inner surface
has equal spaced teeth and belt pulley which have the relative
teeth. While working, the teeth of the belt and teeth of the pulley
joggle each other to transmit the motion and the dynamic force. It
is a king of new type drive which has synthesized all the good
points of belt drive, chain drive and gear drive.
Production type | Top width | Pich width | Height | Angle | Length conversion | Length Range (inch) | Length Range (mm) |
ZX | 10.0 | 8.5 | 6.0 | 40 | 22 | 20-100 | 508-2540 |
AX | 13.0 | 11.0 | 8.0 | 40 | 30 | 20-200 | 508-5080 |
BX | 17.0 | 14.0 | 11.0 | 40 | 40 | 20-200 | 508-5080 |
CX | 22.0 | 19.0 | 14.0 | 40 | 58 | 30-200 | 762-5080 |
3VX(9N) | 9 | 8 | 40 | 50 | 20-200 | 508-5080 | |
5VX(15N) | 15 | 13 | 40 | 85 | 30-200 | 762-5080 | |
XPZ | 10 | 8 | 8 | 40 | 50 | 20-200 | 508-5080 |
XPA | 13 | 11 | 10 | 40 | 63 | 20-200 | 508-5080 |
XPB | 17 | 14 | 14 | 40 | 88 | 30-200 | 762-5080 |
XPC | 22 | 19 | 18 | 40 | 113 | 30-200 | 762-5080 |
Model | Tooth pitch(MM) | tooth height(MM) | total thickness(MM) |
XL | 5.08 | 1.27 | 2.3 |
L | 9.525 | 1.91 | 3.6 |
H | 12.7 | 2.29 | 4.3 |
XH | 22.225 | 6.35 | 11.2 |
XXH | 31.75 | 9.53 | 15.7 |
T5 | 5 | 1.2 | 2.2 |
T10 | 10 | 2.5 | 4.5 |
T20 | 20 | 5 | 8 |
AT5 | 5 | 1.2 | 2.7 |
AT10 | 10 | 2.5 | 5 |
AT20 | 20 | 5 | 8 |
3M | 3 | 1.17 | 2.4 |
5M | 5 | 2.06 | 3.8 |
8M | 8 | 3.36 | 6 |
14M | 14 | 6.02 | 10 |
20M | 20 | 8.4 | 13.2 |
S3M | 3 | 1.14 | 1.9 |
S5M | 5 | 1.17 | 3.4 |
S8M | 8 | 3.05 | 5.3 |
S14M | 14 | 5.3 | 10.2 |