EVER BEST(HK) LIMITED |
|
PC+ GF 20% LUPOY GP2200 Injection Molding Grade Engineering Plastic with General Purpose and Heat Resistance for Electric & Electronic (Mobile phone Housing, TV Components), IT/OA.
PC+ GF 20% LUPOY GP2200 Quick Detail:
1.Injection Molding
2. General Purpose
3. Heat Resistance
PC+ GF 20% LUPOY GP2200 Description:
1. Injection Molding PC+ GF 20% Grade
2. General Purpose
3. Heat Resistance: The Heat Deflection Temperature is 140℃.
PC+ GF 20% LUPOY GP2200 Applications:
Electric & Electronic (Mobile phone Housing, TV Components), IT/OA.
PC+ GF 20% LUPOY GP2200 Datasheet:
Properties | Test Condition | Test Method | Unit | Typical Value |
Physical | ||||
Specific Gravity | ASTM D792 | - | 1.35 | |
Molding Shrinkage (Flow), 3.2mm | ASTM D955 | % | 0.2~0.4 | |
Melt Flow Rate | 300℃/1.2kg | ASTM D1238 | g/10min | 10 |
Mechanical | ||||
Tensile Strength, 3.2mm | ASTM D638 | |||
@ Yield | 5mm/min | kg/cm2 | 1,000 | |
Tensile Elongation, 3.2mm | ASTM D638 | |||
@ Yield | 50mm/min | % | ||
@ Break | 5mm/min | % | ||
Flexural Strength, 3.2mm | 10mm/min | ASTM D790 | kg/cm2 | 1,600 |
Flexural Modulus, 3.2mm | 10mm/min | ASTM D790 | kg/cm2 | 55,000 |
IZOD Impact Strength, 3.2mm | ASTM D256 | |||
(Notched) | 23℃ | kg·cm/cm | 10 | |
-30℃ | kg·cm/cm | |||
Rockwell Hardness | R-Scale | ASTM D785 | - | 122 |
Thermal | ||||
Heat Deflection Temperature, 6.4mm | ASTM D648 | |||
(Unannealed) | 18.6kg | ℃ | 140 | |
4.6kg | ℃ | |||
Vicat Softening Temperature | ASTM D1525 | |||
5kg, 50℃/h | ℃ | |||
Flammability | UL94 | |||
0.8mm | class | |||
1.5mm | class | V-2(NC,BK) | ||
2.5mm | class | |||
3.2mm | class | |||
Relative Temperature Index | UL 746B | |||
Electrical | ℃ | 80 | ||
Mechanical with Impact | ℃ | 80 | ||
Mechanical without Impact | ℃ | 80 |
Electrical | |||
Comparative Tracking Index(CTI) | Solution A | IEC 60112 | Volts |
Surface Resistivity | IEC 60093 | Ohm | |
Volume Resistivity | 23℃ | ASTM D257 | Ohm·m |
Arc Resistance | 23℃ | ASTM D495 | Ohm·cm |
Dielectric Strength, 1mm | 23℃ | ASTM D149 | kV/mm |
Dielectric Constant (106 Hz) | 23℃ | ASTM D150 | sec |