Active Member
|
[China]
Address: ROOM 614 6/F HONG KONG PLAZA 188 CONNAUGHT ROAD WEST HK
Contact name:Michael Zhu
EVER BEST(HK) LIMITED |
|
|
PMMA CM-205 Injection Molding Grade Plastic Raw Material with High Temperature Resistance for External Automotive Light Casings.
CM-205 Quick Detail:
Heat Resistance
CM-205 Description:
PMMA Resin CM205 is Designed For Injection Molding. It Exhibits Injection Heat Resistance Level For Products.
CM-205 Applications:
Extrusion Plates, Rods, Tubes; Injection Heat Resistance Level, Especially Suitable For External Automotive Light Casings/Sunglasses/Digital Watch Casings.
CM-205 Datasheet:
| Properties | ISO Test Method | Test Condition | Unit | CM-205 |
| Melt Flow Index | 1133 | 230℃×3.8KG | ml/10 min | 1.9 |
| Mass Density | 1183 | 23 ℃ | g/cm3 | 1.19 |
| Tensile Strength | 527 | 5 mm/min, yield | MPa | 70 |
| 5 mm/min, break | MPa | 70 | ||
| Tensile Elongation | 527 | 50 mm/min | % | 12 |
| Flexural Strength | 178 | 2 mm/min | MPa | 103 |
| Flexural Modulus | 2 mm/min | GPa | 2.8 | |
| Izod Impact Strength | 180/1A | 23 ℃ Notched | KJ/m2 | 2 |
| -30 ℃ Notched | KJ/m2 | - | ||
Charpy Impact Strength | 179 | 23 ℃ Notched | KJ/m2 | 2 |
| -30 ℃ Notched | KJ/m2 | - | ||
| Vicat Softening Temp. | 306 | 1 Kg,50 ℃/hr | ℃ | 115 |
| 5 Kg,50 ℃/hr | ℃ | 107 | ||
| Heat Distortion Temp. | 75/A | 1.8 MPa Unannealed | ℃ | 95 |
| 1.8 MPa Annealed | ℃ | 104 | ||
Coefficient of Linear Thermal Expansion | 11359 | - | - | 6 X 10-5 |
| Flammability | - | UL-94 | - | 1.5mm HB |
| Mold Shrinkage | 294-4 | - | % | 0.2~0.6 |
| Symbol | 1043 | - | - | >PMMA< |
CM-205 Caution:
1. KEEP AWAY FROM THE HEAT, SPARK, AND FLAME.
2. THE WORKSHOP FLOOR SHOULD BE KEPT CLEAN AT ALL TIMES IN ORDER TO PREVENT ACCIDENT ASSOCIATED WITH LOOSE PELLETS OR FILM.
3. DO NOT EAT THE PELLETS AND AVOID INHALING DUST PARTICLES IN THE PACKAGING BAGS.
4. ENSURE THE PELLETS AND PACKAGING BAGS ARE DISPOSED OF PROPERLY AND IN COMPLIANCE WITH LOCAL/STATE REGULATION.
5. CARE SHOULD BE TAKEN TO AVOID ACCIDENTS WHEN LOADING, UNLOADING OR STACKING THE PRODUCT.
FOR MORE INFOMATION, PLEASE CONTACT US.
