12 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg
swaged wire rope sling, sling assembly, lifting set
DNV 2.7-1 Offshore Container Lifting Sling Set
When DNV revised the DNV 2.7-1 Certification Note, the most
extensive changes were made in the lifting sling requirements. The
sling is a four or five legged wire rope lifting sling fitted with
a quad assembly and shackles. Each component of the lifting sling
is specified to the capacity of the container.
The sling is the most critical component to safety in transporting
the container from the vessel to the offshore platform. The unique
sling design allows for safety even during the inclement weather
conditions often encountered offshore while off-loading the
containers.
Offshore Container are mainly used on offshore oil platforms. They
are much different with normal ISO container. Not only because
strict safety requirements have to be met, but also because they
are mainly transported by small ship and lifted / unloaded by
crane.
Comply with the following standards:
- DNV GL standard DNVGL-ST-E271 – 2.7-1 Offshore containers, August
2017
- DNV GL standard DNVGL-ST-E273 – 2.7-3 Portable offshore units,
December 2016
- ISO 10855-2:2018 Offshore containers and associated liftings sets
– Part 2: Design, manufacture and testing of lifting sets
- EN 13414-1 Wire rope slings
- IMO/MSC Circular 860
Important features:
• Unique ID Number and Tag
• IWRC Wire Rope
• Safety Pin Bow Shackles from Van Beest, Gunnebo or Crosby
• Flemish Splice or Aluminum-alloy Steel Sleeve
• Load tested for ASME B30.9:2006 Certification
Application:
1-, 2-, 3- & 4-Part Lifting Sets, with Forerunner where fitted,
for lifting of:
- Offshore Containers, with Maximum Gross Mass 0 to 25000 kg
- Portable Offshore Units
All slings are produced according to our DNV Quality management
approved system. We have earned a reputation globally as a provider
of high quality products, supported by our trained staff and high
standard of QA/QC procedure and inspections.
Specification
Rating (kg) | Enhancement factor | Minimum required Working Load Limit (WLL min) (tons) |
500 | - | 7.00 |
1,000 | - | 7.00 |
1,500 | - | 7.00 |
2,000 | 3.500 | 7.00 |
2,500 | 2.880 | 7.20 |
3,000 | 2.600 | 7.80 |
3,500 | 2.403 | 8.41 |
4,000 | 2.207 | 8.83 |
4,500 | 2.067 | 9.30 |
5,000 | 1.960 | 9.80 |
5,500 | 1.873 | 10.30 |
6,000 | 1.766 | 10.60 |
6,500 | 1.733 | 11.26 |
7,000 | 1.700 | 11.90 |
7,500 | 1.666 | 12.50 |
8,000 | 1.633 | 13.07 |
8,500 | 1.600 | 13.60 |
9,000 | 1.567 | 14.10 |
9,500 | 1.534 | 14.57 |
10,000 | 1.501 | 15.01 |
10,500 | 1.479 | 15.53 |
11,000 | 1.457 | 16.02 |
11,500 | 1.435 | 16.50 |
12,000 | 1.413 | 16.95 |
12,500 | 1.391 | 17.38 |
13,000 | 1.368 | 17.79 |
13,500 | 1.346 | 18.18 |
14,000 | 1.324 | 18.54 |
14,500 | 1.302 | 18.88 |
15,000 | 1.280 | 19.20 |
15,500 | 1.267 | 19.64 |
16,000 | 1.254 | 20.06 |
16,500 | 1.240 | 20.47 |
17,000 | 1.227 | 20.86 |
17,500 | 1.214 | 21.24 |
18,000 | 1.201 | 21.61 |
18,500 | 1.188 | 21.97 |
19,000 | 1.174 | 22.31 |
19,500 | 1.161 | 22.64 |
20,000 | 1.148 | 22.96 |
20,500 | 1.143 | 23.44 |
21,000 | 1.139 | 23.92 |
21,500 | 1.135 | 24.39 |
22,000 | 1.130 | 24.86 |
22,500 | 1.126 | 25.33 |
23,000 | 1.121 | 25.79 |
23,500 | 1.117 | 26.25 |
24,000 | 1.112 | 26.70 |
24,500 | 1.108 | 27.15 |
25,000 | 1.104 | 27.59 |
About Anfeng Lifting & Rigging
Based in Shanghai Free Trade Zone, Shanghai Anfeng Lifting &
Rigging Ltd. is an experienced technical and sales company
specialized in supplying webbing slings, round slings, wire rope
and slings, chains, rigging accessories and more.
Anfeng supplies steel wire ropes, wire rope slings, lifting chains
and accessories, webbing slings, round slings, fall protection
harness, typhoon resistant series products, lashing, offshore
mooring lines, chain hoists, lever hoists, electric hoists,
shackles up to 1500t, and lifting points.
Our technical staffs make sure the products meet all safety and
manufacturing requirements. Upon request, Anfeng provides customers
with DNV-GL, CCS, ABS and other third-party inspection
certificates.