|
[China]
Trade Verify
Address: Pingqiao Industrial Park, Tiantai County, ZJ, 317203, CHINA.
Contact name:Eric Xiang
Share Group Limited |
|
Verified Suppliers
|
|
|
Pump Fluid Suction Filter Kit For Snow Plow Solenoid Pump Custom Order
The suction filter for a snow plow solenoid pump is a type of filter that is installed on the suction side of the pump to prevent debris and contaminants from entering the pump and causing damage or reducing its performance. It is commonly used in snow plow hydraulic systems to protect the solenoid pump.
Share Filters' snow plow fluid filter is made of synthetic filter mesh and thermoplastic by the processing of mesh insert injection molding. Thanks to wide range of filter mesh openings, Share Filters' suction filters can be available in different filtration ratings, which indicate the size of particles they can effectively capture. It's important to choose a filter with an appropriate rating that suits the requirements of snow plow system.
It's important to note that specific requirements for suction filters may vary depending on the snow plow system and pump model. Always refer to the manufacturer's recommendations and guidelines for customizing the appropriate suction filter for particular snow plow solenoid pump.
Share Filters' Plastic Molded Filters Materials Options:
| Support frame material: | PA, PE, PP, ABS and other thermoplastic |
| Filter media: | Nylon mesh, polyester mesh, PP mesh, metalic mesh |
| Mesh opening: | 25 - 200 micron |
| Application: | Fuel filter, oil filter, fluid filter |
| Specification: | Custom |
| Colour: | Custom |
Nylon Filter Mesh Datasheet
| Ref. No. | Mesh Count | Thread Diam. | Mesh Opening | Opening Area | |
| mesh/cm | mesh/inch | µm | µm | % | |
| JPP40 | 40 | 100 | 100 | 150 | 36 |
| JPP43 | 43 | 110 | 80 | 152 | 43 |
| JPP48 | 48 | 120 | 80 | 130 | 38 |
| JPP56 | 56 | 140 | 60 | 120 | 44 |
| JPP59 | 59 | 150 | 60 | 110 | 42 |
| JPP64 | 64 | 160 | 60 | 100 | 37 |
| JPP72 | 72 | 180 | 50 | 90 | 41 |
| JPP80 | 80 | 200 | 50 | 75 | 36 |
| JPP100 | 100 | 250 | 40 | 60 | 36 |
| JPP120 | 120 | 305 | 40 | 43 | 25 |
| JPP130 | 130 | 330 | 40 | 37 | 23 |
| JPP140 | 140 | 355 | 30 | 38 | 33.7 |
| JPP150 | 150 | 381 | 30 | 34 | 30.25 |
| JPP165 | 165 | 420 | 30 | 28 | 20.7 |
How to select the right filter mesh? You can follow these points.
We're a trusted provider of precision injection-molded plastic parts with mesh filters for critical practices. There are many ways to make a filtration product. Share Filters Can Offer the woven mesh in different types to meet customs' different demands.
Woven Filter Mesh in Rolls
The width of nylon filter mesh rolls can be in 100cm, 127cm, 150cm, 160cm, 175cm, 183cm, 365cm or other custom width.
Length can be 30m, 50m, 70m, or other custom length.
Filter Mesh in Narrow Strips
Share Filters ultrasonic slitting is also used for manufacturing fabric strips and produces a closed edge with very little material build up at the edge.
Filter Mesh in Cutted Shapes
Our cutting method include Laser cutting, Cold cutting, Hot cutting, Slitting, Punching. Professional cutting using custom made tools that will not damage the materials.
Filter Mesh In Tubes
Sonic welding are accurate, clean. Lapping welding strength to some degree.
Custom Nylon Filter Mesh Bags
Share Filters has standard filter bags with galvanized steel or plastic rings, which are sewn or welded, made of regenerable monofilament filter cloth from 3 micron to 2000 microns or felt from 0.5 microns to 200 microns.
Mesh Insert Plastic Injection Molded Filters
Our injection moulded filters products consist of a synthetic filter mesh held in a polymer plastic frame, allowing for a more robust part/product giving more reliability and longevity in its use.
