Spot Welding Plain Steel Wire Mesh Cloth Disc For Solid / Gas Separation Muffler

Spot Welding Plain Steel Wire Mesh Cloth Disc / Welded Extruder Screen filter screen disc

Material: Stainless steel, phosphor-bronze, nickel, low carbon steel, copper, brass
Wire Diameter: 0.017-2.03mm
Weave Style: Plain weave, Twilled weave, Dutch weave
Roll width: 0.9144m,1.05m,1.22m,1.524m,1.83m (3', 3.5', 4', 5', 6')
Length: 30.5m or as requested
Sample: Available
Mesh size: 1x1-635x635mesh/inch
Certificate: ISO9001-2008

Packing:

Each package wrapped by plastic paper, then put into the standard export box or wooden case

Application of Plain Steel WIre mesh

1) Solid/gas separation Muffler, silencer Air purification
2) Filtering oil dedusting, Isolation dust, dustproof
3) Moistureproof Heat insulation ,
4) Uniform gas,well-distributed, diffuse gas or oil or heat
5) Breathable protection ,Pharmaceutical , medicine
6) Chemical ,Chemical fiber
7) Filtration for high temperature environment
8) High pressure reverse wash filtering

Production process for plain steel wire mesh
1. Raw material checking - Test wire diameter, wire mechanical property and chemical composition.
2. Wire Warping - Roll the wires all over the bobbin creel which is part of weaving machine.
3. Mesh Weaving - Get the weaving machine started to work
4. Quality Inspecting: Check if mesh surface and specification conform to the custmer requirements.
5. Epoxy Coating: Take electrostatic powder coating
6. Quality rechecking: Check if the situation of hole blockage exist
7. Edge Cutting: Cut the extra edge off
8. Packing - Put the mesh roll to the certain package and then store in the finished product warehouse.
 

We finished above mentioned products using our own equipment facility, so on basis of competitive cost, quality can be under good control without any rough-handling which is always existed in the outside processing plant.

If you have any inquiry for the plain steel wire mesh, please feel free to ask.