Nanjing Powder New Material Co., Ltd. |
|
Epoxy polyester powder coating for Kitchen appliances,Interior use RAL 1000 Green beige color
EPOXY POLYESTER POWDER COATINGS Based on specially selected resins to give the hard durable finish associated with epoxy coating but with superior heat stability and exterior durability.Typical applications for epoxy polyester powder coatings are those where a tough decorative finish is desirable such as domestic appliances and office furniture. For use requiring ultimate heat stability and outside durability polyester powder should be used.
SURFACE TYPES:
Gloss,satin,matt,wrinkle,sand,transparent,antique,metallic,crocodile skin,hammer,wood effect/sublimation,candy/luminous ect.
We also can offer specail patern finish according to the needs of customers.
APPLICATION:
Epoxy polyester powder coating is very suitable for many kinds of appliance products such as gas and electric ranges,refrigerator doors and shelves,washing machines and dryers,freezers,water heaters,vacuum cleaners,kitchen appliances,microwave ovens,garbage disposals,dishwashers.
OUR ADVANTAGES:
1) 11 years experience on epoxy powder, polyester powder, hybrid powder, polyurethane powder coating.
2) ISO 9001:2015 CERTIFIED.
3) Full set of solutions for powder coating.
4) Powder coatings for indoor&outdoor uses.
5) 8 production lines with capacity of 300-500 tons per month.
6) RAL colors, Pantong colors,color matching custom are available.
7) Samples available.
8) Testing by SGS available.
SPECIFICATION:
Main Material | Polyester resin,barium sulfate,titanium dioxide |
Surface Type | Gloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood effect,candy,chrome,transparent,semitransparent,metallic,and special pattern |
Powder Properties | Specific gravity : 1.3 - 1.75 (depend on colors) |
Average particle size : 35 - 45um | |
Coating Properties | Film thickness(ISO 2178) :60 - 90 μm |
Coverage:15㎡ based on 60μm | |
Pencil hardness: ASTM D3363,H-2H | |
Adhesion :GB/T 9286-1998,0 grade | |
Bending test:GB/T 6742 ,=<2mm | |
Cupping test:GB/T 9753,>=7mm | |
Direct and reverse impact (ASTM D2794) : > 50kg.cm | |
Salt spray Resistance ( ASTM B117, 1000hrs)(Maximum undercutting ,1 mm ): No blistering or loss of adhesion | |
Heat and moisture test GB/T 1740,>=1000 hours,no change | |
Application Schedule | Applied by : Electrostatic spraying devices |
Curing schedule :10 minutes at 200 ℃ | |
Advantage | Good adhesion,anti-corrosion,UV resistant, strong coating film, |
Accurate colors, good leveling | |
Shelf Life | 12 months
|
SUBSTRATES AND PRE-TREATMENT
In order to obtain optimal anti-corrosion properties, it is recommended to apply a chemical pretreatment
prior to powder coating application.
STORAGE
Purchase Note:
1. M.O.Q :
The minimum order is 500kg ,each color ≥ 100kg
2. Colors:
RAL color :we usually use RAL colors that is widely used in paint industry and easily find in market
Custom color : Color matching is available , if you have colors model ,please send to us for matching .
3. Prices:
Prices depend on the colors and using environment ,for prices please tell us the colors and using environment (indoor use or outdoor use).
4. Time of delivery :
Production will take about 5-8 days after receipt of prepayment,this is subject to the quantity .
5. Payment :
30% T/T prepayment , 70% T/T before shipment (or against BL) or LC at sight .
6. Samples:
1kg powder sample is available for each color for your testing.
Sample is free of cost,but if you pay for the air freight we will
highly appreciate.