Active Member
|
[China]
Address: 12/F,Tai Sang Bank Building 130-132,Des Voeux Central,Hong Kong,CHINA
Contact name:Catherine
POETRONICS INDUSTRIAL LIMITED |
|
|
POE-S108T
8 Port IEEE802.3at 10/100Mbps 25W POE Switch
1 Port Gigabit RJ45 Uplink and 1 Port SFP Uplink
3.6Gbps Bandwidth, Built-in 150W Power Supply
POE-S108T, 8 Port Channels table top Power Over Ethernet Switch, which data rate is 10/100Mbps and comply to IEEE802.3at standard, it also comes with two optional Uplink ports including a Gigabit RJ45 interface and a SFP Gigabit interface. The power it require is 150W power adapter which is built in the PoE switch.
Its compact and flexible Plug and Play design along with its outstanding feature that PoE power sourcing equipment provides Ethernet data and power over a single network cable (Cat5, Cat5e, Cat6, etc.) which makes it easy for IP based and PoE-enabled system, So it's going to reduce a lot of comprensive cost for installation, it includes cable cost and labour cost.
There always is a power classification as part of the start-up process before running a PoE connection regularly. The Powered Device (PD) can advertise its Power Class, which will indicate how much electrical power it requires to operate. This classification specifies two different values for Power of PoE-PSE and PoE-PD due to the power lost in cabling, However, under this principle, there will be no damage of any involved connected devices and it enhance efficiency, reliability and safety.
Main Features
1. IEEE 802.3at compliant Power over Ethernet Switch
2. 10/100Mbps Ethernet data rate
3. 8×100Mbps PoE port with 1G combo uplink
4. Maximum 30 watts for single PoE port
5. Automatical detection of PoE class level for connected Powered Device
6. 3.6Gbps Backplane Bandwidth
7. Forwarding rate: 100Mbps/148,800pps; 10Mbps/14,880pps
8. Status LEDs: System Power, PoE, 100 Mbps, and Link/Activity
9. Full wire-speed non-blocking reception and transmission
10. Store-and-forward switching method
11. Back pressure Flow Control for Half-Duplex mode
12. EEE 802.3x Flow Control for Full-Duplex mode
13. Sturdy rack mountable metal enclosure, Plug and Play
14. Easy installation and using, no need to convert by software and network protocol
15. One year limited warranty
Detailed Specification
Item: 8 Channels Power Over Ethernet Switch (25W POE)
Model: POE-S108T
Network Port:
- 10/100Mbps POE port (8 ports)
- 10/100M/1000Mbps Uplink (the 9th port)
- 10/100M/1000Mbps SFP (the 10th port)
Transmission Speed: 100M/1000Mbps full duplex
Internet Interface: 100BASE-T or 1000BASE-TX POE RJ-45 port
Primary Performance:
- Bandwidth: 3.6Gbps (non-blocking)
- Network delay(100 to 100M bps): Max 20 microsecond, (64-byte packet size)
- Packet buffer memory: 96KB
- Database size: 1,024 MAC address; 1000Mbps/1488.00pps, 100 Mbps/148,800pps, 10 Mbps/14,880pps
Network Standard:
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3x Flow Control
- IEEE 802.3at Power over Ethernet
LED Lights: Status Indicator of Power, PoE, Link/Activity
Power Supply: Built-in 150W Power Supply Adapter
Ambient Environment:
- Operating Temperature:0°C~40°C(32°F~104°F)
- Storage Temperature: -10°C~70°C(14°F~158°F)
- Operating Humidity:10%~ 90%, non-condensing
- Storage Humidity: 5%~90%, non-condensing
Electromagnetism:
- Compatibility
- CE Class B
- FCC Part 15, Class B
- VCCI Class B
- C-Tick
Safety Approval: CE(EMC/LVD), FCC, ROHS
Dimension: 280mm×180mm×44mm; Weight: 2.5kg/piece
Warranty: One year
