Active Member
|
[China]
Address: 12/F,Tai Sang Bank Building 130-132,Des Voeux Central,Hong Kong,CHINA
Contact name:Catherine
POETRONICS INDUSTRIAL LIMITED |
|
|
POE-S1081F
8 Port IEEE802.3af 10/100Mbps 15.4W Power Over Ethernet Switch
1.8Gbps Backboard Bandwidth
48V/2A External Power Supply Adapter
POE-S1081F, 8 port channels 10/100Mbps PoE switch, which powered by external DC48V/2A power supply. This 8 ways PoE supply power for PoE Powered Device (PD, such as CCTV IP Camera, Wireless AP, VoIP Phone, etc.) over just a single Ethernet cable, which make it very easy for equipment installation. It does not require power lines or power socket beside the terminal powered device as PoE cable (cat5. cat5e, cat6, etc.) will deliver data along with power originate from Power Source Equipment (PSE). There will be always an advance detection before power PDs base on standard protocol IEEE802.3af, this PoE specific priciple is dedicated to protect the involve device in a electric system as the PSE in PoE will figure out how much power the terminal PD require after advance detection and supply appropriate power accordingly, which will avoid damages of over-load, over-voltage, over-current or under-load, under-voltage, etc. So, in this case, no mattter, the connected PD is PoE-Enable or PoE-Disable, which will not broken any equipment.
The maximum power/data transmission distance is around 100 meters over Cat5, Cat5e, Cat6 or higher level cables, the quality of applied cable is better, the delivering distance will be longer as it depends on the power degradation in the transmission. Its Plug and Play design makes the installation quite easy, there will no need extra configuration, Finally, It will greatly reduce the comprehensive cost of installtion instead having electrical power cabling installed.
Main Feature
1. 8 10/100Mbps Auto-Negotiation RJ45 PoE (PSE) ports
2. Compliance with IEEE802.3af protocol standards
3. Each port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet)
4. 1.8Gbps Backboard Bandwidth
5. Maximum 15.4W power ourput each PoE port
6. Automatically detection protecting the system avoid overload or PoE-disable PD
7. LED Lights indicates status of monitoring power, link, activity and speed
8. DC 48V/2A external power adapter, power over pin 12(+), 36(-)
9. Supports IEEE802.3x flow control for Full Duplex and back-pressure for Half Duplex mode
Detailed Specification
Protocol Standard: IEEE802.3, 802.3u, 802.3af, 802.3x; CSMA/CD, TCP/IP
Basic Feature:
- Wire-speed Performance
- MAC Address Auto-Learning and Auto-aging
- IEEE802.3x flow control for Full-Duplex Mode and back-pressure for Half-Duplex Mode
- Backboard Bandwidth: 1.8 Gbps
Power Supply: DC48V/2A External Power Adapter (AC100-240V, 50/60Hz)
Transfer Method: Store-and-Forward
Interface: 8 10/100/Mbps RJ45 ports, Auto-negotiation, Auto MDI/MDIX
Network Media:
- 10Base-T: UTP category 3, 4, 5 cable (max 100m)
- EIA/TIA-568 100Ù STP (maximum 100m)
- 100Base-Tx: UTP category 5, 5e cable (max 100m)
- EIA/TIA-568 100Ù STP (max 100m)
- 1000Base-T: UTP category 5, 5e cable (max 100m)
LED Lights: Status Indicator of Power, Link/Act (10/100Mbps)
Safety Approval: CE, FCC, RoHS
Ambient Environment:
- Operating Temperature: 0°C~40°C (32°F~104°F)
- Storage Temperature: -10°C~70°C (14°F~158°F)
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~90% non-condensing
Size/Weight: 225mm×121mm×35mm, 1.35kg/piece
Packing: Box Size 30cm×26cm×5cm, 20pcs/carton (63cm×53cm×27cm)
Warranty: One year
Package Content:
- Content: 8 port PoE switch
- Datasheet, User Guide
- DC48V/2A DC Power Supply Aadapter, Optional Power Cord
