POE-PSE01M 10/100Mbps 48W Passive POE Injector by POETRONICS

10/100Mbps 48W Passive Power over Ethernet Injector

POE-PSE01M

This is a single-port Power over Ethernet Injector that offer 48W power supply and together with a 10/100Mbps data transfer rate. The PoE Injector is suitable for indoor using as power source for Ethernet devices such as Network Switches, Wireless AP, IP Phone, Network/IP Camera and other PoE powered applications. The cable pass through PoE injector and the end network terminal equipment require Ethernet cable at class Cat5 or higher level. It dedicated to provide high efficient solutions that powering the device installed at remote place at a higher system reliability just through Ethernet cable and greatly simplifying the whole installation.

Feature

1. Power Protection:

 - Input: Over-voltage/Under-voltage protection

 - Output: Over voltage/Over current protection for each output channel

2. System Reliability: MTBF＞80k hours

3. Conducted interference (CE) and Radiated interference (RE), meets EN55022, CLASS B standard

4. Lightning Protection:

 - AC Input terminal: It can stand 2KV for differential mode and 6KV for common mode, 8/20uS instantaneous current wave, positive and negative 5 times each, 1 mins interval each time;

 - PSE: It can stand 2KV for differential mode and 6KV for common mode, 10/700uS instantaneous current wave, positive and negative 5 times each, 1 mins interval each time;

Power lightning protective circuit has a failure alarm function and security protecting component

Specification

Installation Diagram