Home Companies Ningbo Sanmin Import And Export Co.,Ltd.

UT Union Tee Stainless Steel SS316L Pneumatic Tube Fittings Plumbing Fitting High Quality Sanmin

Contact Us

[China]

Trade Verify

Contact name:Ina Chen

Ningbo Sanmin Import And Export Co.,Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

UT Union Tee Stainless Steel SS316L Pneumatic Tube Fittings Plumbing Fitting High Quality Sanmin

Country/Region	china
City & Province	ningbo zhejiang

Product Details

UT Union Tee Stainless Steel SS316L Pneumatic Tube Fittings Plumbing Fitting High Quality Sanmin

Tube Fittings Description

The tube fitting is a mechanism used both to seal and to grip tubing . The mechanical advantage and geometry of this kind of fitting produces a leak – tight assembly .

To assemble , simply insert the tube into the complete assembly until the tube bottoms – out against the shoulder of the fitting body . The two ferrules are driven forward between the nut and fitting body using the mechanical force created by rotating the nut clockwise . The Back ferrule is driven against the tapered rear of the front ferrule is driven by force into the tapered mouth of the body .

The rear ferrule is swaged radially inwards on the tube while lifting the front ferrule out to form a full – faced seal on the tapered surface of the body .

The 1-1/4 Turn of the nut from the hand tight position assures consistent drive of the sealing members . This ensures an effective seal against high pressure as well as ultra high vacuum conditions .

Tube cutting

Two different methods can be used to cut tubes :

1 . Tube Cuter

2 . Hacksaw

Hacksaw Cutting

In order to cut the tube with a hacksaw and get square ends , the tube must be cut with guide blocks

This method of cutting necessitates deburring of the tube ends.

Warning

Do not hold the tube in a vise in the place where it will be inserted into the fitting ( the vise will leave a mark on the tube that may cause leaks , and might cause ovality ).

Some Recautions to be taken

1.Tubes must not be dragged on the floor .

2.Tubes must not be dragged out of a tubing rack , especially in case of large OD tubes

Inspection Tubing

Use : This is a “ No- Go ” Gauge and should be used as follows :

Make up to fitting according to the following instructions : 1/4 inch ( 6mm ) , 3/8 inch , 1/2 inch ( 12mm ) – make up 1-1/4 turns from finger tight . Check gap between nut and body , using the appropriate sized gauge . If the gauge slides easily into the gap , tighten the nut further until gauge can not enter the gap

High Safety

In applications where severe conditions and high pressure exist , we recommend the following installation procedures :

1. Check that the nut is finger tight

2. Insert the tube ( Up to the shoulder )

3. Rotate the nut with a wrench until the tube does not rotate freely .

4. Mark position of the nut .

5. Rotate the nut 1-1/4 turns .

This method ensures that even if the tube O.D. is at the minimum tolerance , the ferrules will be in contact with the tube for the full 1-1/4 rotation.

In order to assure maximum fitting reliability and performance , great care should be given when selecting the tubing for each application

FAQ

Q: What ' s your delivery date ?
A: It depends on the number of orders . Delivery date is 7 - 30 days .if small order,pls buy from our aliexpress shop, If you need emergency products , we can speed up the production of the first arrangement .

Q: What is the price of the product ?
A: Our prices are based on the size and type of material , if you can give me the information ,
then we can give you an estimated price is for reference only . We can do any size and any desgin .

Q: what types of products you can make ?
A: We can make many kinds of stainless steel materials and brass,aluminum . Valve / solenoid valve / electric valve / pneumatic valve and air cylinder products and so on .

Q: How much is our minimum order quantity ?
A: Our minimun quantity is 1 Piece .

Q: Can the product be made with our logo and brand ?
A: Yes , of course , we can make . we are OEM supplier for years and professional to make . But you need give us the authorization for work.

Why choose us

1: Various style for each products and completely series pneumatic products .

2: High quality with competitive price .
3: Sample order & small quantity order is acceptable .

4: Reliable quality assured and active after-sell service
5: Customize according to your special request .

Fittings hose , Male female brass fitting , Male female fitting , Pipe fitting , Pipe fittings plastic , Plastic fitting , Pneumatic fitting , Push fittings , Quick connect fitting , Quick connecting , Quick coupling fittings , SS304 , Stainless steel fittings , Stainless steel pipe fittings , Tee tube fittings , Threaded stainless steel fittings , Tube connector , Tube fitting , Pipe Connection , Pipe Joint , Plasitc Quick , Couplers , Pneumatic parts , Threaded Union , Fitting pneumatic , Push in fitting , Push on fitting , Speed Controls , Stop fittings , Quick connecting tube fitting , Speed Controls , Check Valves , Hand Valves , Ball Valves , Hand Sliding fitting , Air control valve , Mini fitting , Push - In Fitting , Transition fitting , Push on fitting , Compression fitting , 316L Stainless steel fitting