|
[China]
Trade Verify
Address: Room 1920, Building 3, Excellence Century Center, Shibei District, Qingdao, Shandong, China
Contact name:Tom
Qingdao Henger Shipping Supply Co., Ltd |
|
Verified Suppliers
|
|
|
Airbag advantages:
Put a lot of uninflated cylindrical bladders under the bottom of
the boat, then inflate the top of the boat, remove other obstacles
below, and then slowly release the airbags at the back a little
bit, and place the hull a little backward. If you use the power to
push it a little bit in the front, the boat will naturally go into
the water behind, and the boat will be launched.
Ship launching in the shipbuilding industry is a relatively complex
process. Inland and coastal shipping ships generally use track
sliding and airbag rolling methods. Track sliding requires a berth
or dock. Due to high investment costs and small scope of
application, it is generally only used. Selected by large
shipyards. Marine airbags are widely used by small and medium-sized
shipyards due to their small overall investment and wide range of
applications.
Heavy goods handling:
Marine airbags are widely used in caisson lifting, transportation,
launching and other fields in port construction, as well as
component displacement and launching.
Floating and salvage:
Marine airbags can generate greater buoyancy and strong
load-bearing capacity, and are now widely used in rescue of
stranded ships and other buoyancy and salvage fields.
The principle of ship airbag hauling:
The working principle of the airbag "roller" hauling caisson is
basically the same as that of the drum hauling heavy objects.
Several airbags are placed between the bottom of the caisson and
the ground, and the caisson is inflated to lift the caisson, and
then the caisson is pulled by external force to roll the airbag,
thereby driving the caisson to move. Compared with the traditional
roller, the airbag can produce greater deformation under the weight
of the caisson. Increase the contact area between the airbag and
the ground, so that the pressure per unit area is reduced, the
force is even, and the adaptability to the site is strong. The
structure and characteristics of the structure The airbag is a long
cylindrical shape and consists of 3 layers of rubber and nylon cord
fabric. The inner and outer layers are rubber layers, and the
middle is a nylon cord fabric layer.
Inflatable Marine Rubber Airbag Technical Parameter
| Model | D(m) | P(Mpa) | Working Height(m) | Unit Bearing Capacity(ton/m) | |||||
| 0.4D | 0.5D | 0.6D | 0.4D | 0.5D | 0.6D | ||||
| S1 |
S10 | 0.8 | 0.20 | 0.32 | 0.40 | 0.48 | 15.1 | 12.6 | 10.0 |
| 1 | 0.16 | 0.40 | 0.50 | 0.60 | 15.1 | 12.6 | 10.0 | ||
| 1.2 | 0.14 | 0.48 | 0.60 | 0.72 | 15.8 | 13.2 | 10.6 | ||
| 1.5 | 0.11 | 0.60 | 0.75 | 0.90 | 15.5 | 13.0 | 10.4 | ||
S11 | 0.8 | 0.19 | 0.32 | 0.40 | 0.48 | 14.3 | 11.9 | 9.5 | |
| 1 | 0.15 | 0.40 | 0.50 | 0.60 | 14.1 | 11.8 | 9.4 | ||
| 1.2 | 0.13 | 0.48 | 0.60 | 0.72 | 14.7 | 12.2 | 9.8 | ||
| 1.5 | 0.10 | 0.60 | 0.75 | 0.90 | 14.1 | 11.8 | 9.4 | ||
S12 | 0.8 | 0.24 | 0.32 | 0.40 | 0.48 | 18.1 | 15.1 | 12.1 | |
| 1 | 0.19 | 0.40 | 0.50 | 0.60 | 17.9 | 14.9 | 11.9 | ||
| 1.2 | 0.16 | 0.48 | 0.60 | 0.72 | 18.1 | 15.1 | 12.1 | ||
| 1.5 | 0.13 | 0.60 | 0.75 | 0.90 | 18.4 | 15.3 | 12.2 | ||
| 1.8 | 0.10 | 0.72 | 0.90 | 1.08 | 17.0 | 14.1 | 11.3 | ||
| S2 |
S20 | 1 | 0.24 | 0.40 | 0.50 | 0.60 | 22.6 | 18.8 | 15.1 |
| 1.2 | 0.20 | 0.48 | 0.60 | 0.72 | 22.6 | 18.8 | 15.1 | ||
| 1.5 | 0.16 | 0.60 | 0.75 | 0.90 | 22.6 | 18.8 | 15.1 | ||
| 1.8 | 0.13 | 0.72 | 0.90 | 1.08 | 22.0 | 18.4 | 14.7 | ||
| 2 | 0.12 | 0.80 | 1.00 | 1.20 | 22.6 | 18.8 | 15.1 | ||
S21 | 1 | 0.27 | 0.40 | 0.50 | 0.60 | 25.4 | 21.2 | 17.0 | |
| 1.2 | 0.23 | 0.48 | 0.60 | 0.72 | 26.0 | 21.7 | 17.3 | ||
| 1.5 | 0.18 | 0.60 | 0.75 | 0.90 | 25.4 | 21.2 | 17.0 | ||
| 1.8 | 0.15 | 0.72 | 0.90 | 1.08 | 25.4 | 21.2 | 17.0 | ||
| 2 | 0.14 | 0.80 | 1.00 | 1.20 | 26.4 | 22.0 | 17.6 | ||
S22 | 1 | 0.31 | 0.40 | 0.50 | 0.60 | 29.2 | 24.3 | 19.5 | |
| 1.2 | 0.26 | 0.48 | 0.60 | 0.72 | 29.4 | 24..5 | 19.6 | ||
| 1.5 | 0.20 | 0.60 | 0.75 | 0.90 | 28.3 | 23.6 | 18.8 | ||
| 1.8 | 0.17 | 0.72 | 0.90 | 1.08 | 28.8 | 24.0 | 19.2 | ||
| 2 | 0.15 | 0.80 | 1.00 | 1.20 | 28.3 | 23.6 | 18.8 | ||
| 2.5 | 0.12 | 1.00 | 1.25 | 1.50 | 28.3 | 23.6 | 18.8 | ||
| S3 |
S30 | 1 | 0.35 | 0.40 | 0.50 | 0.60 | 33.0 | 27.5 | 22.0 |
| 1.2 | 0.29 | 0.48 | 0.60 | 0.72 | 32.8 | 27.3 | 21.9 | ||
| 1.5 | 0.23 | 0.60 | 0.75 | 0.90 | 32.5 | 27.1 | 21.7 | ||
| 1.8 | 0.19 | 0.72 | 0.90 | 1.08 | 32.2 | 26.8 | 21.5 | ||
| 2 | 0.17 | 0.80 | 1.00 | 1.20 | 32.0 | 26.7 | 21.4 | ||
| 2.5 | 0.14 | 1.00 | 1.25 | 1.50 | 33.0 | 27.5 | 22.0 | ||
Airbag packaging and transportation:
According to the provisions of the CB/T 3795-1996 of the People's
Republic of China Ship Industry Standard, the packaging,
transportation and storage of marine airbags should comply with the
following standards:
1. Packaging
Folded and packed with plastic woven bags.
2. Transportation
Airbags should be lifted, lifted, and rolled in an inflated state
when transported on short distances. It is strictly forbidden to
drag on the ground.
The airbag should be folded and fixed to the tray during
long-distance transportation, with a cushion underneath, and
wrapped with a wrapping film on the outside.
The development history of marine airbag:
According to related records, humans have been using the rolling
wood principle to carry heavy objects more than 6,000 years ago.
People still use the rolling wood principle to carry heavy objects
in daily production and life. Marine airbag is a flexible heavy
vehicle designed according to the principle of rolling wood.
In the 1980s, due to the manufacturing process and materials of
airbags, the weight of airbag launching ships was between 100 tons
and 500 tons.
In the early 1990s, people made innovations in the process and
materials of airbag manufacturing: nylon cords replaced canvas as a
new skeleton material, and a new type of integral winding
manufacturing process was developed.
Some marine airbag manufacturers still use the old production
technology of lap type. It is generally believed that the
integrally produced marine airbag is more reasonable in structure
and has a greater safety factor and bearing capacity.
Water-filled blasting test is an important method to check the
performance of marine airbags.
Service and transportation:
The product warranty period of Henger is 18 months, and the average supplier can not reach such a long time, which is
also the trust we and customers have in our factory products.
After-sales service we are online 24 hours a day, as long as you have questions we will always be there, there will
be professional staff to answer your questions and provide you with
technical support.
Transportation We can take the deflation pallet transportation and
the entire fender transportation without deflation according to the
requirements of customers. We always put the customer's
requirements first.
Thank you for reading. If you have any needs and interests, you can contact me.
Thanks for reading, if you have any interest or questions, please feel free to contact me.
