Vulcanization Inflatable Rubber Fender Integral Molding Yokohama Fender

Vulcanization Of Inflatable Rubber Fender Integral Molding Process Yokohama Fender

Pneumatic rubber fender features:

1, large energy absorption, small reaction force, so as to ensure that neither damage the hull nor damage the shore wall.

2, simple installation, portable, in any ship, any sea area is not affected by the tide and the size of the ship.

3. Good resilience, the product will not be deformed due to the force after the force is exerted. After the fender is squeezed, more than 95% of the product will be released immediately after the force.

4, good economic performance, compared with the fender, Beierte ship fenders economic performance is good, cost-effective, reliable quality. Beierte Marine Fenders has gone through layers of inspection to ensure its quality from raw material procurement, product ordering, product production and product inspection to delivery.

Inflatable rubber fender and pneumatic fender are commonly used dimensions and properties

Instructions for operation and maintenance

1. The maximum deformation of the inflatable rubber fender in the use process is 60% (except for special ship type or special operation), and the use pressure is 50KPa-80KPa (the use pressure can be determined according to the user's ship type, tonnage size and near environment).

2. During the use of Marine pneumatic fender, attention should be paid to avoiding the puncture and scratch of sharp objects; And timely maintenance and maintenance, in general 5- 6 months for a pressure test.

3, often check the pneumatic rubber fender body for puncture, scratch. The surface objects in contact with the fender shall not have sharp protruding hard objects to prevent puncturing the fender. When the fender is in use, the cable or chain or wire rope hanging the fender shall not be knotted.

4. When the fender is not used for a long time, it should be cleaned and dried, filled with appropriate amount of gas, and placed in a dry, cool and ventilated place.

5. The fender should be kept away from heat, and should not contact with acid, alkali, grease and organic solvent.

6, do not pile up when not in use, do not pile up heavy objects on the fender.

Inflatable rubber fender structure diagram

Pressure test for inflatable rubber fender

Display of inflatable rubber fender products

Service tenet:

Integrity management, quality first; Create a world famous brand, do a hundred years of enterprise;

Rigorous and pragmatic, considerate; Serve every user attentively.

After-sales service:

1. All products of the company are produced in strict accordance with ISO17357:2014 standards.

2, the company's products in normal use, the life of 8-10 years.

3, the company will carry out strict inspection on each product before leaving the factory, to ensure that all products without any quality problems before leaving the factory, so that every user can rest assured with.

4, the company's product quality warranty period of 2 years, quality problems occurred during the warranty period free repair or replacement.

5. Responsible for guiding repair and maintenance process, and long-term supply of repair materials and tools.

6. Instruct or participate in the implementation and application of products to various projects.

7. Provide pre-sale, in-sale and after-sale services