Home Companies BOGEN PUMPS

Food Grade 1 Inch Air Diaphragm Pump , Air Driven Diaphragm Pump 0.83 Mpa

Contact Us

[China]

Trade Verify

Address: E 18Floor Fazhan Build No.13 Easy Huayuan Road Chancheng Area Foshan City.

Contact name:ALLSON

BOGEN PUMPS

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Food Grade 1 Inch Air Diaphragm Pump , Air Driven Diaphragm Pump 0.83 Mpa

Country/Region	china
City & Province	foshan guangdong
Categories	Pumps

Product Details

Food Grade 1 Inch Air Diaphragm Pump , Air Driven Diaphragm Pump 0.83 Mpa

1 Inch Air Diaphragm Pump introduction

1 Inch Air Diaphragm Pump is a new type of pump developed in China.Using compressed air as the power source, all kinds of corrosive liquids, granular liquids, high viscosity, volatile, inflammable, highly toxic liquids can be exhausted by light absorption.

Corrosion resistance high temperature resistance high pressure strong suction easy installation,No noise, no sparks.

Item	Description	Unit	Reference Figure
1	Maximum air inlet pressure	Mpa	0.83
2	Maximum flow rate	1/Min	192
3	Maximum lift	M	70
4	Maximum outlet pressure	Mpa	0.83
5	Maximum particle size	mm	3
6	Weight	kg	12.3
7	Noise level	db	＜70

1 Inch Air Diaphragm Pump Applications:

Food industry: yogurt, whipped cream , ice cream , cheese blocks , whey , beer, malt , yeast , jam , syrup, soda , juice , pudding , tomato sauce , sesame paste, peanut butter , spices , cooking oil, whey , etc.

Chemical industry : gels, facial cleanser, hand soap, shower gel, washing powder , skin care products , hair dyes, refined sesame oil , toothpaste, detergent , shampoo, shoe polish , cosmetics, fragrances , soaps, balms , glycerin , fatty acids and so on.

Pharmaceutical industry: various types of pills paste, emulsifier, syrup, nutrition , medicine , poultice , biological products, fish, pollen, royal jelly , vaccines, health care and so on.

Chemical industry: fat, solvents, resins , polymers, paints, pigments , dyes , paints, lubricants, grease , oil agent, emulsified asphalt , adhesives, plastics , explosives, glass, steel, leather and so on.

Construction industry : a variety of coatings, including interior and exterior paint , corrosion materials, ceramic coatings, paints , ceramic glazes and so on.

Other industries : plastics industry, textile industry, paper industry , coal floating agent, nano-materials, bio- chemical industry.

A 2 5 X X - X X X - X (model selection)

Form of pipe mouth:A-BSP B-NPT(F) C-Flange

Diaphragm material:9 – Santoprene H – Hytrel T - PTFE/Santoprene

Ball material:9 -Santoprene H – Hytre T – PTFE A - Acetal

Ball seat material:P/K –Polypropylene/Kynoar SS –Stainless Steel

Pump material: SS –Stainless Steel AL –Aluminum Alloy CI- Carbon Steel P/K –Polypropylene/Kynoar

Maximum Applied Temperature Limits (diaphragm / ball / seal material)

Acetal ··············································· 40°- 150°F (4.4- 65.5°C)

Santoprene········································· -40°- 225°F (-40°- 107.2°C) ··················································40°- 220°F (4.4°- 104°C) Nitrile···················································10°- 180°F (-12°- 82°C) Viton····················································-40°- 350°F (-40°-176.6°C) Hytrel····················································-20°-150°F (-12°- 93°C) Kynar····················································10°-200°F (-28.9°- 65.5°C) Polypropylene··········································32°- 175°F (0-79.4°C)

1 Inch Air Diaphragm Pump diagram

Requirements for Air and Lubrication

EXCESSIVE AIR PRESSURE. Can cause pump damage, personal injury or property damage.

A filter capable of filtering out particles larger than 50 microns should be used on the air supply. There is no lubrication required other than the “O” ring lubricant which is applied during assembly or repair.
If lubricated air is present, make sure that it is compatible with the “O” rings and seals in the air motor section of the pump.

OPERATING INSTRUCTIONS

Always flush the pump with a solvent compatible with the material being pumped if the material being pumped is subject to “setting up” when not in use for a period of time.
Disconnect the air supply from the pump if it is to be inactive for a few hours.
The outlet material volume is governed not only by the air supply but also by the material supply available at the inlet. The material supply tubing should not be too small or restrictive. Be sure not to use hose which might collapse.
When the diaphragm pump is used in a forced -feed (flooded inlet) situation, it is recommended that a “Check Valve” be installed at the air inlet.
Secure the diaphragm pump legs to a suitable surface to insure against damage by vibration.

Maintenance

Please refer to the component schematic in the assembly drawings to look up the serial numbers and names of parts and grasp the information of parts and maintenance service pack.
Some BSK parts are marked as "wearing parts", which can conduce to quick service and downtime reduction.
Service kits are divided to service two separate diaphragm pump functions: 1. AIR SECTION, 2. FLUID SECTION. The FLUID SEC -TION is divided further to match typical part MATERIAL OPTIONS.
Provide a clean work surface to protect sensitive internal moving parts from contamination from dirt and foreign matter during service disassembly and reassembly.
Keep good records of service activity and include pump in preven -tive maintenance program.
Before disassembling, empty captured material in the outlet man -ifold by turning the pump upside down to drain material from the pump.