|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
Ningbo Fly Automation Co.,Ltd |
|
Verified Suppliers
|
|
|
Uses flame resistant resin as standard.(UL standard V-O)
Available with a restrictor (Made to order: -X214, -X21)
Made to Order
1. Lubricant: Vaseline
Ex.)AS1201-M5-F04-X12
2. Grease-free (Seal: Fluorine Coating)+Throttle Valve (without
Check Valve)
Ex.)AS1201-M5-F04-X21
Note 1) Not particle-free
Note 2) This product is a restrictor without a check valve (no
control direction).Be
aware that all part numbers are for a meter-out type; there is no
part number for a meter-in type.
3. Throttle Valve (Without Check Valve)X214
Ex.) AS1201-M5-F04-X214
Note ) This product is a restrictor without a check valve (no
control direction).
Be aware that all part numbers are for a meter-out type; there is
no part number for a meter-in type.
| Component Parts | ||||
| No. | Description | Material | Note | |
| 1 | Body A | Zinc alloy | Chromate plated | |
| 2 | Body B | Brass | Electroless nickel plated | |
| 3 | Needle | Brass | Electroless nickel plated | |
| 4 | Needle guide | Brass | (1) | |
| 5 | Seat ring | Brass | (2) | |
| 6 | Lock nut | Steel (3) | Meter-out | Zinc chromate plated Note 4) |
| Meter-in | Black zinc chromate plated | |||
| 7 | Handle | Brass | Electroless nickel plated | |
| 8 | Bushing | PBT | ||
| 9 | Cassette | PBT/Stainless steel | ||
| 10 | U-packing | HNBR | ||
| 11 | Seal | NBR | ||
| 12 | O-ring | NBR | ||
| 13 | O-ring | NBR | ||
| 14 | O-ring | NBR | ||
| 15 | O-ring | NBR | ||
| 16 | Gasket | NBR/Stainless steel | M5 port only | |
| Model | Port size | Applicable tubing O.D. | |||||
| 4 | 6 | 8 | 10 | 12 | |||
| AS12▢ 1-M5 | M5 x 0.8 | ● | ● | ||||
| AS22▢ 1-01 | R 1/8 | ● | ● | ||||
| AS22▢ 1-02 | R 1/4 | ● | ● | ● | |||
| AS32▢ 1-02 | R 1/4 | ● | ● | ||||
| AS32▢ 1-03 | R 3/8 | ● | ● | ||||
| AS42▢ 1-04 | R 1/2 | ● | ● | ||||
| Note 1) : Brass parts are electroless nickel plated, provided as standard. (N specifications) | |||||||
| Specifications | |||||||
| Fluid | Air | ||||||
| Proof pressure | 1.5 MPa | ||||||
| Max. operating pressure | 1 MPa | ||||||
| Min. operating pressure | 0.1 MPa | ||||||
| Ambient and fluid temperature | – 5 to 60°C (No freezing) | ||||||
| Applicable tubing material | FR double layer, FR Three-layer, FR soft nylon, Nylon, Soft nylon, Polyurethane | ||||||
| Option | Round lock nut, Electroless nickel plated Note) | ||||||
Meter-out and meter-in types can be visually differentiated by the lock nut.
The lock nut on the meter-out type is zinc chromated (the round lock nut is electroless nickel plated) while the meter-in type is black zinc chromate plated.
Note) Brass parts are all electroless nickel plated.
A Caution
Use caution for the anti-corrosiveness of finger guide section.
Martensitic stainless steel is used for the finger. However, be
aware that its anti-corrosion performance is inferior to austenitic
stainlesssteel. ln particular, the finger might be rusted in an
environment where water droplets are adhered to it due to dew
condensation.
How to Mount the Attachment to the Finger
To mount the attachment to thefinger, make sure to use awrench to support the attachment so as not to applyundue strain on the finger.Refer to the tablebelow for the propertightening torque onthe bolt used forsecuring the attachment to thefinger.
