YIKANG AUTOMATION |
Verified Suppliers
|
|
Description:
Very high performance diaphragm valve with flanged inlet port and slide seal outlet port for easy valve installation and removal.
Available with integral pilot or as remotely piloted valve.Outlet at 90°.
Suitable for
Dust collector applications, in particular for reverse pulse jet
filter cleaning including bag filters, cartridge filters, envelope
filters, ceramic filters, and sintered metal fibre filters.
Construction
Body: Diecast aluminium or 316
stainless steel
Ferrule: 304 SS
Armature: 430FR SS
Seals: Nitrile or fluororubber (reinforced)
Spring: 304 SS
Screws: 302 SS
Outlet Slide Seal: EPDM or fluororubber
Diaphragm Seat: PA-6 (standard), fluororubber
coated mild steel
Refer to Q Series Solenoid product data
sheet for solenoid construction details.
Weights
Size | Integral Pilot (CA) Kg (lbs) | Remote Pilot (RCA) Kg (lbs) |
45 | 1.830(4.03) | 1.610(3.55) |
Diaphragm Kits:
Model | Nitrile | fluororubber | Includes |
CAC/RCAC45FS | K4516 | K4519 | Diaphragm kits include main diaphragm and spring. |
Operation
Recommended,
On time range:50-500ms
Recommeded time
between pulses:1 minute or greater
Installation:
1.Prepare inlet flange and blowtube pipes to suit valve specification.
Avoid installing valves underneath the tank.
2.Ensure tank and Pipes are free from dirt,rust or other particulate.
3.Ensure supply air is clean and dry.
4.Mount valves to inlet flange and blowtube to valves with all seals in place.
Tighten flange bolts to 10Nm(7.4ft-ibs) Ensure blowtube is oushed all the way into the valve outlet.
5.Tanks and pipes must be independently restrained from valve.
6.Make electrical connections to solenoid or connect RCA pilot port to pilot valve.(RCA valve only).
7.Apply moderate pressure to system and check for installation leaks.
8.Fully pressurise system.
9.Test fire and listen for proper actuation and crisp pulse noise.
Valve is not a structural component. Do not rely on valve to retain
tanks or pipe. Refer to Camlock product specification for
installation details.
*Pipes must be to Schedule 40 outside diameter
Schedule 40 Size | OD mm | OD Inches |
1.5" | 48.3 | 1.900 |
Drawing:
FAQ
1. When your company establish?
Ningbo Fly Automation Co.,Ltd Was established in 2010, we have been
working in agrochemical field for about 26 years, we have a
professional production of process, committed to providing
customers with the most satisfactory service.
2. Are you a trader or manufacturer? Do you have factory?
We are a solenoid valve manufacturer, we have the ability of mass
production . we have our own developing and designing team, which
ensure our own technological and specific products for customers.
3. Where’s your factory located? Can we visit your factory?
Our company is in Xikou town,Fenghua city,Zhejiang Province,
China,Which is near by Ningbo city,
Customers will be always welcomed to visit our company and our
factories.Please contact us your schedule,we will arrange to pick
up you and visit our factory.
4. How do you make the quality guarantee?
We have our own quality control center, we have advanced equipments
for the inspections. We can guarantee every product will be tested
after production.
5. Can you support the specific productions?
We can design and develop the products of customer's requirement,
if you have the specific products, please send us a sample, we will
develop it for you.
6. What's the transportation service?
Usually, we will be according your address, choose the fastest and
cheapest way, the DHL,TNT,Fedex or China post express all can
support.
Serves time
0:00 - 23:59
From Monday to Sunday