|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
Ningbo Fly Automation Co.,Ltd |
|
Verified Suppliers
|
|
|
HXQF-24C HYVA 14750665H Dump Truck Valve Hydraulic System Limit Valve
1)Power: Hydraulic
2) Material: Aluminum
3) Automatically locked in stop and fall position
Working Principle:
Pneumatic limit valve is often used in the hydraulic lifting device
of dump truck. Its function is to immediately reset the lifting
valve stem to the initial state when the car body is set with a
certain lifting Angle. The high-pressure hydraulic oil flows back
to the oil tank and makes the cylinder stop lifting the car body.
Tipping valve kits:
To simplify the proces of choosing the right adapters and mounting
equipment has prepared tippingvalve kits for tank mounted and
chassis mounted valves. We have options with straight or 90
connectionsfor 3/4" & 1" high pressure hoses.
Dimension
| Max. pressure | 12 bar |
| Min. pressure | 5 bar |
| Max. temperature | +80℃ |
| Min temperature | - 40℃ |
| Connections 1, 21, 22 | G1/8” |
| Connection 3 | M5 |
| Mounting holes | M6 |
Attention
Use always rubber grommets to protect air tubes and to prevent that
dust and water enters the cabin.
For trouble free life of the entire pneumatic system the air system
must be free from water.
The air control should be mounted in such a way that:
1 it is easy to reach by the operator.
2 it is no obstacle when entering or leaving the cabin.
3 it is clear from any moving parts such as drivers seat and closed
door.
The air exhaust connection must be brought outside the cabin to
prevent air entering the cabin, which gives the following
disadvantages:
1 noise
2 blown up sand and dust
3 when alcohol is used to prevent the pneumatic system against
frost the alcohol vapour will enter the cabin
Make sure that air tubes:
1 are not too close to sharp objects.
2 are clear from moving parts.
3 are clear from exhaust and compressor lines.
4 can not get kinked.
5 are not too long.
Quality Standards :
The company for the products are brand new original products, no
second-hand and refurbished products, or leave a compensable ten
and return the full amount , but the buyer due to our purchase of
model error is not responsible for returns, another of the
company's sales of products enjoy one year from the date of
shipment quality assurance , according to the original quality
standards , during warranty with product problems , need
confirmation testing by the manufacturer , the supplier to be
solved , the demand side due to storage , use, poor maintenance
caused by lower-quality product , and not raise objections
Samples
You can send a sample to customize the products, we have many
engineers can help it; If you want a product of mine, but you are
not sure if it's what you want, so you can ask for a sample from
me, it will be free.
After-sale service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
