|
Trade Verify
Address: Liandong-U-Gu 17-2#, Shengyuan Road 1#, Jiangkou Street, Fenghua District, Ningbo City, Zhejiang Province, China
Phone: +86-
Contact name:Jaren
Ningbo Fly Automation Co.,Ltd |
|
Verified Suppliers
|
|
|
Bin feeder DL15 1/2" Silicone Helps dry powder products flow in flat or conical bin and funnel
1.Application
The silo breaker is designed to help dry powder products flow in
flat or cone shaped silos and funnels.For a standard equipment,
installation conditions should be PH value neutral and temperature
below 170 ° C.The fluidizer works best when moisture content is
less than 12-15%.Large particles such as pebbles, feed, grains and
granules cannot be inflated.When the particles are embedded in each
other, such as wood planer, plastic or fiberglass, the archers do
not achieve the desired effect.
2.The material used
Please select different types of guide rods according to your
specific material conditions. The hopper breaker is available with
a variety of guide rod sizes and material options. We only list the
standard type of products here.
3.Positioning principle
Bin broken GongQi in inflatable 1/3-1/2 of the bottom of the cone
of the export operation, the slope of the cone should be at least
45 °, in order to get the best working effect, the bottom row of
broken GongQi in discharging mouth - as close to the 12 "(300 mm),
above, each row of broken GongQi interval - as in 16" - 20 "(400 mm
- 500 mm), each row layout should break GongQi mutual crisscross,
arch breaker to achieve maximum coverage.The spacing of the
arthropods at higher positions can be increased.
4.Installation instructions:
The hopper breaker provides two installation methods, standard
installation and external installation kit. According to different
installation methods, corresponding through holes are drilled on
the side wall of the silo. After passing through the through holes,
the vault breaker can be fixed with a nut.With our external
installation kit, the installation and maintenance of the vault can
be carried out outside the hopper, which is especially suitable for
small internal space or inconvenient installation.
5.Maintenance Suggestions:
The following recommendations are made annually:
(1) check the abrasion condition of the breaker. The breaker should
tighten the pressure and seal the hopper wall. If the outer edge of
the breaker is damaged, it cannot be attached
The wall of the hopper shall be replaced in time.
(2) check whether there are any lumps of powder under the broken
arch tray, which can be cleaned by disassembling the disc and guide
bar
Is the type 0 sealing ring on the rod damaged so that it cannot be
sealed.
(3) when reinstalling the hopper fluidizer, be sure to tighten the
nut to the recommended 35 newton-meter torque.
| Model | DL15 |
| Work temperature | 0-170℃ |
| Body Material | Silicone |
| Humidity | ＜12-15％ |
NingboFly Automation was founded in 2006. We have many years experience in producing pneumatic components. Pneumatic components includes pneumatic fittings, pulse valves, water valves, induction coil, solenoid valves, manual valves, air control valves, angle seat valve, air preparation units, cylinders, air gun, air brush, machinery parts, PU/PE pneumatic & hydraulic tubes and pneumatic accessories.
Our factory is in the national tourist resort---Xikou Town, Ningbo,
China, adjoins the world-class deep water harbor------Beilun port,
2 hours driving to Shanghai, only 20kms away from Ningbo Lishe
International Airport, whereby it enjoys great traffic convenience.
Our products quality is strictly controlled according to ISO
quality standard. The perfect producing and testing equipments,
advanced quality management system, professional manufacture and
sales team guaranteed our forceful before-sale and after-sale
service.
We keep the policy “Favorable price, on-time delivery, steady
quality, ceaseless development heart-to-heart service and Win-win
mode”.
Delivery
1. If the products we have in store, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex,
TNL will be normal ways, If you require use of a courier, we can do
it.
4. Also we can send by your delivery acount if you want.
After-sale service
We can provide a series of after-sale service, such as product
introduction, mounting, debugging, technical support and so on.
Products shopping guide
For example: you want to purchase a batch of cylinders but you
don't know which type you are really want, so you can tell me all
your requirement and I'll recommend to you.
Serves time
0:00 - 23:59
From Monday to Sunday
Quality Standards
The company for the products are brand new original products, no
second-hand and refurbished products, or leave a compensable ten
and return the full amount, but the buyer due to our purchase of
model error is not responsible for returns, another of the
company's sales of products enjoy one year from the date of
shipment quality assurance, according to the original quality
standards, during warranty with product problems, need confirmation
testing by the manufacturer, the supplier to be solved, the demand
side due to storage, use, poor maintenance caused by lower-quality
product, and not raise objections.
