Active Member
|
[China]
Address: No.35 Shunsun road,Lubu Town,Yuyao City,Zhejiang,China
Contact name:Allen
NINGBO ZHONGYIDA SANITARYWARE CO.,LTD. |
|
|
F1/2XM3/8 Flexible Pull Out Kitchen Sink Flexible Shower HosEasy Clean Faucet Hose
| Description: |
This Shower hose design to solve the high temperature, explosion prevention, water leakage, easily broken problems.
Outer layer PVC anti abrasion, inhibit bacterial protection layer, bright chrome plating,Middle layer adopt PEX materials, cold resistant, heat-resistant material,inner layer use high strength explosion proof netted fiber knitting. deformation and pressure reversal in all directions,Brass nut, ensure tight docking, not easy to broken.adopts high quality EPDM rubber ring and has good sealing property.
It have advantages of good elasticity, good flexibility, easy bending, winding prevention, skid proof, knot proof, durability, health, environmental protection and meet drinking water standard.
| Specification: |
1.Chrome Plated Brass Nut,2.EPDM Rubber washer 3.Brass inset 4.AISI 304 Stainless steel Fleeve 5.pvc Tube
6.Brass Nut, 7.Female Brass Screw
| Specification | Dia 14mm, F1/2"xF1/2" |
| OUTER DIAMETER | 8.2*14.50 |
| NDS NUTS | BRASS;STAINLESS STEEL |
| INSERT | BRASS;PLASTIC;NYLON;ALUMINIUM |
| Connected dimension | G1/2" |
| Material of outer tube | PVC |
| Finish of outer tube | PVC |
| Material of inner tube | PVC/EPDM inner tube |
| Material of nuts | Plastic/Brass |
| Working pressure | 12Mpa |
| Working temperature | Below 90℃ |
| Certificate | ACS,REACH,EN1113 |
| Quality assurance | 5 years guarantee |
| MOQ | 1000 pcs |
| Package | Bubble bag,blister,color box |
| Lead time | Within 20days after receipt of deposit |
| Payment term | T/T,L/C etc. |
| CERTIFICATION | ACS/CE |
| Quality control: |
Incoming Materials -> IQC ( Incoming Quality Cotrol ) -> Materials to be stored in warehouse -> Production Dept. take the materials -> Production Dept. makes pre-production sample -> Sales Dept. confirms the samples -> Production Dept. start mass production -> IPQC ( Input Quality Control ) -> LQC ( Line Quality Control ) -> FQC ( Finished Quality Control ) -> OQC ( Outgoing Quality Control ) -> Goods ready for shipment
1.Cycle test:5000 cycles,according to DIN EN 1113
2.Work pressure:125 PSI
3.Test pressure:290 PSI
4.Burst Pressure:>290 PSI
5.Pull Strength:>500 N
6.Temperature:up to 90°C
| Packing and delivery: |
Each one put into PE bag blister,50pcs/ctn.shipped in 25days after receive deposit.
