Shenzhen XH Technology Co., Ltd. |
|
6mm Transparent Polycarbonate Sheet Unbreakable Roofing Panels
6mm transparent polycarbonate sheet unbreakable roofing panels
1. Polycarbonate Sheet
The function of PC endurance board
1. It is suitable for pavilions in gardens, amusement places and
exotic decorations and resting places;
2. It can be used as a wardrobe endurance board, which is suitable
for the interior and exterior decoration of commercial buildings
and the curtain wall of modern urban buildings;
3. It is suitable for aviation transparent containers, motorcycle
front windshields, airplanes, trains, ships, automobiles,
motorboats and submarines;
4. It is suitable for the layout of telephone booths, advertising
street signs, light box advertisements, and exhibitions; it is
suitable for instruments, meters, high and low voltage switch
cabinet panels, LED screen panels and military industries;
5. It is suitable for high-end interior decoration materials such
as walls, ceilings and screens;
6. Suitable for noise barriers on expressways and urban elevated
roads;
7. Suitable for agricultural greenhouses and breeding greenhouses;
8. It is suitable for the ceiling of modern ecological restaurant;
9. It is suitable for the lighting ceiling of office buildings,
department stores, hotels, villas, schools, hospitals, stadiums and
public facilities;
10. Widely used in curtains.
2. Parameter
Proudction Method | Co extrusion |
Material : | Polycarbonate Granule ; UV inhibitor |
Color | Clear, blue, bronze, green,opal |
Light transmittance | 50%--87% |
Purpose | General |
Appearance | Smooth |
UV exposure | UV protection |
Thickness | 1.5mm, 2.0mm, 3.0mm, 4.0mm, 6.0mm, 8.0mm, 10mm, 12mm, 16mm |
Width | 1220mm to 2100mm |
Length | For thickness 1.5mm to 5.0mm : max. 30.5m/roll ; For thickness5.0mm to 16mm : max.5.8m |
3. Clear polycarbonate sheet features:
4. Matters needing attention in the construction of PC solar panels
1. The discussion of the two plates needs to
reserve sufficient elastic space according to the rotation of the
local temperature difference. In the case of PVC gussets, the gap
severity is more than 50% of the screw diameter.
2. Please use special sealant, other types of
sealants may corrode the plate, making the plate brittle and easy
to crack. The PVC seal will corrode the board. When installing the
solar panel, it is necessary to select the sealant paste and gasket
suitable for polycarbonate plastic, and it is strictly forbidden to
use the PVC seal and gasket. It is forbidden to touch alkaline
substances and aggressive organic solvents in the board, such as
alkalis, amines, ketones, aldehydes, ethers, halogenated
hydrocarbons, aromatic hydrocarbons, formaldehyde-based propanol,
etc.
3. During the construction process, the screws
on the board should be suppressed directly, and the screw holes
should be touched first, and then the screws should be installed.
If the plate needs to be straight and curved, the straight and
curved force should be suppressed on the screw.
4. The solar panel can be roughly straight and curved
means that it can be roughly straight and smooth in an arc shape,
not roughly straight into any middle shape. When cold and straight,
the straight and curved target must be perpendicular to the target
of the plate ribs, the cold straight radius of the solar panel must
be greater than 175 times the thickness of the plate, and the cold
straight radius of the solid board must be greater than 100 times
the thickness of the plate. Cold straight radius contest formula:
R= 1/2h ㎡ /8h (R= straight radius; h= arch; m= span).
5. When the drilling device is used to allow
the expansion of the plate, the diameter of the drilling should be
greater than 50% of the diameter of the screw, and the distance
from the screw hole to the edge of the plate should not be less
than 50mm, and the screw should not be too tight. The screws should
not be too dense. The main idea is to use one screw every 50cm or
more (the thicker the plate, the larger the screw distance
required)
6. Be careful not to touch with corrosive chemical
solvents to prevent damage to the board. Please use neutral
detergent or non-aggressive detergent to scrub with water to
prevent surface marks.
5. XH Company and Production Line
7. Package and shipping
7.1. One piece of acrylic sheet package: double-sided covered with kraft paper or PE film, the cover film does not have any LOGO of our company.
7.2. Tray package: the total weight of each pallet is about 2 tons, the bottom is wooden pallet or iron pallet, and the surrounding is packed with corrugated paper.
7.3. The packaging method of the whole container: 20-23 tons (about 3000 pieces) 20-foot container, 10-12 pallets.