Large Capacity Plastic Film Recycling Machine / Pe Pp Film Washing Line

Large Capacity Plastic Film Recycling Machine / Pe Pp Film Washing Line

Plastic Film Recycling Machine mainly include belt conveyor, crusher, friction washer, floating washer machine, screw feeder, dewatering machine, pipe drying system, storage hopper, electric cabinet etc.

The complete line can deal with PE/PP plastic, PE/PP plastic waste mix, Waste PP woven bag, plastic bags, Household waste plastic, Waste plastic film.

Capacity :300-1000kg/h, and we can design the machines as your requirement.

Plastic Film Recycling Machine Main technical parameter:

With the agriculture technology grow up, and our daily life increased, agricultural film and cover film are widely used in agriculture area. It can improve the agriculture development, Increasing in the variety of crops brings huge benefits. Then the fast development it brings big problem for Contaminated land and recycle film.

But we have the solution to settle this problem, we have the special technical team, it can solve the sand and water etc. problem, meanwhile can solve dewater, dry, pelletizing and high capacity problem. Especially for our film squeezing machine, STPLAS has very nature technology.

Due to the films have large sand, stone and other Impurities (about 50-60%). So it will be broken the crusher blade, Reduce the life of the blade. So about this problem, we make a solution:

• Adopt the hydraulic packing shearing machine, which will pack the films, and cutting as the size of 150-200mm. each pack cuts 5-7 knife.
• Then going to belt conveyor, the belt conveyor has melt detector.
• After belt conveyor, it has roller screen, make the films loose, the waste sand, stone can take out when on roller screen. After entering the sanding machine, through high-speed rotation, a mesh hole is provided in the barrel to discharge some small debris, silt and small metal,
• and then enter the crusher. At this time, the material contains about 10% of sediment.

Reduced wear on crushers and Blades.

• The material after crusher, it goes to high speed friction washer, then going to floating washer machine.
• The film material stretch in the water, with four rollers to stay more time in the water, than the dirty material will be down on the tank , then go into low speed friction machine.
• further cleaning, into the next level rinse tank cleaning and separation,
• spiral feeding plastic into the extruder, the extrusion material is in a semi-plastic state, the water is about 7-8%, through the air sent to the storage room for natural evaporation water
• After the granulation, it was fed with a side feeding and two-stage filtration, and the water ring was pelletized.

We can supply the capacity from 300-2000kg/h.

After washing ,the material goes into film squeezing machine ,or pelletizing extruder. We both can supply these two machines.

If you want to know more information ,contact with us freely.