Customized Size Plastic Washing Recycling Machine 500-3000kg/H Capacity

Customized Size Plastic Washing Recycling Machine 500-3000kg/H Capacity
 

Plastic Washing Recycling Machine Description:

-This pet flake hot washer machine is used for mixing waste HDPE PET bottle scrap.

-The material will stay at hot washer for 8-10 minutes, and the hot washer steamer feed with chemical (caustic Soda/NaOH/or other detergent) , and the temperature should be keep 90-95℃.

-this system can be used Gas, electric and diesel to steam the hot washer according the customer requirement.

-Rotor shaft inside hot washer is made by stainless steel.

Plastic Washing Recycling Machine parameter

Plastic Washing Recycling Machine shining points:

1. Our Machine raw material adopt stainless steel 304.

2. Our PET bottle crusher equiped with the force feeding pressing device,

when the pet bottle us non - pressed, having this device will effectively avoid the

bottle jump inside the chamber of the crusher, at the mean time, this device can

enhance capacity to some degree.

3. High speed friction washer is new type. since the blade of the friction washer is easy to get blunt, so the new type friction washer blade can be dismantled and be changed.

4. Dewatering machine is also new type: the rotary speed can reach to 2200rpm. While the old model can be 1200. the new type can dry the pet flakes to 2% moisture content.

no need the air pipe dryer and blower, and at the same time,save power for you.

Plastic Washing Recycling Machine Advantages:

-Final products has good quality. When process PET bottle, final products humidity below 1%, impurities100ppm,PVC label content 100ppm . The whole line capacity between 300kg/h-2000kg/hour

-Parts which contact material use SUS304 stainless steel, thickness more than 3mm, ensure long service lift time

-World famous brand components applied on the production line- e.g. SKF bearing, Siemens contactor, Omron temperature, Siemens PLC controller, etc.