Zhangjiagang Zhmc Machinery Co.,Ltd. |
|
PVC wall panel making machine plastic sheet machine corrugated sheet making machine
PVC wall panel making machine plastic sheet machine Application
1. This production line adopts intelligent control and automatic operation.
2. Wallboards of various specifications, sizes, shapes and thicknesses can be produced by replacing different moulds.
3. This wallboard is a new kind of decorative material instead of wall paint and wallpaper.
4. It also has many elements such as environmental protection, heat insulation, moisture-proof, fire protection, sound insulation and fashion. The material is light and easy to install.
Extruder
1. The screw barrel is made of 38CrMoALA and nitrided by
equipments from Zhejiang Zhoushan Weibo Machinery Co., Ltd. PLC
Control System
2. The nitriding depth of screw is 0.4-0.6 mm, the hardness
(HV) is 740-940, and the surface roughness Ra is less than 0.8 um.
3. The nitriding depth of the barrel is 0.5-0.7mm, the
hardness (HV) is 940-1100, and the inner wall roughness Ra is less
than 0.8um.
4. The gearbox is vertical split. The gears are treated by
20CrMoTi nitriding and grinding, the gear material of the
distribution box is nitrided by 38CrMoAlA, and the shaft is made of
40Cr. The main bearings are domestic famous brand bearings, running
smoothly.
Vaccum forming machine
1. The flume is made of stainless steel.
2. The whole unit length: 4M
3. Width of center track of calibrating unit : 850mm
4. Vacuum pumps: 5.5KW * 2, direct water ring vacuum pumps
with Schneider overcurrent protection. (Water must be released in
winter to prevent frost damage)
5. Vacuum: 0-0.09 Mpa
6. Pump Power and Quantity: 1.5KW Vertical Unit
Haul off machine
1. Number of traction belts: 2
2. Each traction is equipped with a deceleration motor. The
deceleration motor: 5.5kW frequency converter provides speed
control.
3. Inverter manufacturers: Zhongchen
4. Length of traction belt: 2500mm
5. Specification of traction rubber block:600.5.35
6. Effective width of traction belt: 600mm
7. Connection mode between rubber block and caterpillar: screw
connection type, fastening and reliable installation
Cutting machine
1. Cutting direction of saw blade: transverse cutting
2. Cutting motor power and quantity: 2.2KW * 1 set
3. Maximum cutting size: 320.65 mm
4. Full computer control, easy to operate, reduce the failure
rate.
5. Electrical Control Components: Control Components Using
Schneider Contactors
6. Machine Center Height: 1000+50 mm
7. Work pressure: 0.5-0.7 Mpa
8. Can choose manual and automatic cutting mode with stainless
steel shackle system
Composition of Plastic Board/Sheet/Plate Production Line
No. | Description | Quantity |
1 | Vacuum auto Loader + Hopper Dryer | 1 set |
2 | Main single screw extruder | 1 set |
3 | Hydraulic network auto changing system | 1 set |
4 | Mould/Die head | 1 set |
5 | Three-roller Calender | 1 set |
6 | Temperature controller of three rollers | 1 set |
7 | Cooling frame with side cutting unit | 1 set |
8 | Haul off machine | 1 set |
9 | Cutting machine | 1 set |
10 | Stacker or Winding machine | 1 set |
Product Display