Self Adaptive Industrial Desiccant Dehumidifier 220 Voltage PID Control

CSG 1000 Dehumidifying Dryer

Product Description

CSG 1000 is a fully automatic drying system with zeolite desiccant beds, which Can be used with Hopper Bank Series and multi-hopper systems. It can adapt and automatically control operating parameters based on type and quantity of polymer.Up to 40% energy saving in comparison with traditional dryers.

Advantages

1.Ease of maintenance with access process, regeneration, and air filters.

2.Self-adaptive PID temperature control from 60℃ to 300℃.

3.No use of cooling water.

4.No moving or rotating internal parts.

5.No need of manual control, Full auto-adaptive operation.

6.On-board heating unit on hopper.

7.Diagnostic functions,Dewpoint, heater, and temperature alarm.

8.Visual and audible alarms available.

9.Anti-stress function protecting polymers against overheating.

10.Sturdy, well proven design for extended operational life.

11.Visual and audible alarms available.

12.Automatic dew point control system: not switch to new desiccant bed before the dew point gets -30°C.

Feature

1. Microprocessor is used for accurate temperature control.

2. Hot air down-blowing design ensures even distribution of hot air to maintain a steady temperature in the

hopper and increase drying efficiency.

3. Digital P.I.D temperature control with LED display.

4. Innovative design with sleek appearance.

5. Overheat protection to ensure reliable operation.

6. Automatic start/stop timer one week to improve energy saving.

7. Drying hopper and hopper lid can be fully insulated for high temperature application.

8. Option accessories: euro-hopper suction box, euro-hopper mobile floor stand, material door magnet,

magnetic base(aluminum or stainless steel), blower inlet filter, hot air recycling, exhaust air filter.
 

9. Europeanization design, double-wall with imported thermal insulation material filled in interlayer,

shorten the heating time and reduce heat loss, therefore saving energy & high efficient.

10. Standard equipped hot air recyclers.

Air volume control ​

According to all the data collected by the system, through ABB frequency converter, we can control fan power and air volume, avoid risk, improve efficiency and save energy! The traditional drye cannot control air volume, which wastes energy, and increases the loss. If air volume is fixed and the fan configuration is not adjustable, the full amount of air must be configured. when the output is not high and the raw material is dry, it is not necessary to have such a large amount of air, so the surplus is wasted.if using ABB inverter, the air volume can be provided on demand, the raw material can be dried uniformly, thus, the finished product quality is guaranteed.