Active Member
|
[China]
Address: No. 10, Floor 8, Unit 1, Bldg. 1, Zhongcheng Qingnianhui, No. 1, Baibuting Street, Danshuichi, Jiang'an Dist.
Contact name:Fiona lau
Wuhan Jia Qirui Card Technology Co., Limited |
|
|
Custom Dual Rod Air Cylinder Small Industrial Robot Arm
Introduction:
HR series machines are used in 50T-500T plastic horizontal injection molding machines with 3-axis and 5-axis AC servo drives. The finished arm is for taking out the product and the material head, and the upper and lower arms can be driven by cylinder or AC servo. The take-out time is 0.5 sec, and the full cycle of 5.0 sec is applied to quick take-out or multiple take-out applications.
Parameter:
| Model | HRVS-700 |
| Size (length*width*high) | 2087*1240*1720mm |
| Power Source | AC220V±10V 50/60 HZ |
| Working Pressure | 5Kgf/cm² 0.49Mpa |
| Max.AllowedPressure | 8Kgf/cm² 0.8Mpa |
| Drive System | Z By model X.Y Pneumatic Cylinder |
| Swivel | 90° Fixed Pneumatic |
| Control System | HS380 HS580 |
| Power Capacity | 1.5/2KVA |
| Recommendedl.M.M. | 80-200ton |
| Traverse Stroke | 1300mm |
| Crosswise Stroke | S3:P:500 S5:P:500R:300 |
| Vertical Stroke | 700mm |
| Max.Loading | 5Kg |
| Dry Take Out Time | 0.6s |
| Dry Cycle Time | 4.8s |
| Air Consumption | 3 NI/cycle |
| Net Weight | 185-235Kg |
