HDPE Plastic Granules Stainless Steel Pulverizer With Abrasion - Resistant Steel Blade

HDPE Pulverizing Mill Plastic Granules Stainless Steel Pulverizer Machine

The motor that installed on this HDPE Pulverizing Mill Plastic Granules Stainless Steel Pulverizer Machine is 22 kw. The capacity of this pulverizer is around 50-300kg. Normally, the capacity is influenced by the plastic grade and the plastic powder size you required. If the powder is 30 mesh, you will get about 100 kg LLDPE powder per hour. This plastic pulverizer is very economic and is widely used in pulverizing plastics that is of moderate hardness. For instance, PE LDPE MDPE PET, PS, PPS, EPS, PC, Styrofoam, HDPE EVA, PVC, PP, ABS, PA, PE, Cow leather and so on. MF400 plastic pulverizer machine adopts the advanced technologies from Europe and combines with advanced design concept and market demand. That's why we solved the problem of low output and high energy consumption. Over the 11 years experience, we have improved the large,medium and small stainless steel pulverizer. 

Main Features

• Both the board and the cutting blade are made of abrasion-resistant steel, with excellent performance after heat treatment.
• With severeness of framework, the volume of the machine is quite small. If you open door closure, you can maintain it. It is completely airproof and without any dust leakage.
• With winding reclaiming equipment, the machine is features by cooling materials evenly, quick cooling and some other characteristics.
• Installation and maintenance easy, open the door to cover clean-up.
• Milling process of the whole seal, without dust leakage.
• Full automatic feeding the materials and sorting.
• Water and wind cooling system
• With water cycle and wind cooling, the machine can be applied into processing heat sensitive material.
• With the tail-wagging air stream (partly eddy flow) produced by the tail-wagging of the main shaft capstan of the machine, the input tail-wagging materials collide strongly with the board and the cutting blade, and was grinded into powdery (without sieving).
• The surfaces that touch the plastic are stainless steel
• Easy to maintenance and replacement of blades .
• Simple installation and easy maintenance

Main Technical Parameter

Specifications are not binding and subject to change without notice.

FAQ

Q1. Are you factory or trading company?

A: We are professional manufacturer of plastic machinery with over 10 years experience. Also, we are trading for different customers.

Q2. Where is your factory located? Is it convenient for us to visit?

A:Our head factory located in Zhangjiagang city, Jiangsu Province, China. About 2 hours by car from shanghai airport. We can pick you up if you need.

Q3. What about your machinery?

A:Seeing is believing. Our strength technical team guarantee the highest quality. You can send your material to our factory, then we can test it and show you the final results.

Q4. What about delivery time?

A: We have strongest worker team and half-finished products in storge. So we can send within 15-20 days for normal plastic machinery.

Q5. What about after service?

A: Our engineers are aviliable for machine installation overseas. We can offer 12 months warrenty, except for durable parts. After the expiration of the guarantee, we will offer spare parts or repair service with or without charges.

• Type of Plastic: MFI (Melt Flow Index)
• Size of regrind to be fed into the pulverizer:
• Machine currently using to make regrind?
• What process:(eg. Extrusion, blow molding, etc.)
• Size of powder desired:
• Mesh/Micron size
• Required throughputs per hour:
• Any special characteristics to your particular material:(eg. Additives etc.)

A lot of factors need to be considered for the selection of the correct sized pulverizer. To make it easier for you to get a quote about HDPE Pulverizing Mill Plastic Granules Stainless Steel Pulverizer Machine, please let us know the above answers.

At the end...

We warmly welcome you to visit us and check the quality. & Sincerely hope to work with you in near future.