Active Member
|
[China]
Address: No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China
Contact name:Vivian Chen
shanghai Guangsu Manufacture Co.ltd |
|
|
Big injection moulding machine for plastic pallet making and manufacturing
Specification:
| GS128V | ||||
A | B | C | |||
INJECTIONUNIT | Screw Diameter | mm | 36 | 40 | 45 |
Screw L/D Ratio | L/D | 23.3 | 21 | 18.7 | |
Shot size(Theoretical) | cm3 | 173 | 214 | 270 | |
PS) Injection Weight | g | 157 | 195 | 246 | |
PS Injection Rate | g/s | 83 | 102 | 130 | |
PS Plasticizing capacity | g/s | 11.3 | 13.9 | 18 | |
Injection Pressure | Mpa | 231 | 188 | 148 | |
Screw Speed | Rpm | 0-180 | |||
CLAMPINGUNIT | Clamp Tonnage | KN | 1280 | ||
Toggle stroke | mm | 360 | |||
Space Between Tie Bars | mm | 410 x 410 | |||
Max.Mold Height | mm | 450 | |||
Min.Mold height | mm | 150 | |||
Ejector stroke | mm | 120 | |||
Ejector tonnage | KN | 33 | |||
Ejector Number | piece | 5 | |||
OTHERS | Max.Pump Pressure | Mpa | 17.5 | ||
pump motor power | KW | 11 | |||
Heater Power | KW | 9.75 | |||
Machine Dimension(L*W*H) | m | 4.85 x 1.27 x 1.96 | |||
Machine Weight | t | 4.6 | |||
PS Hopper Capacity | Kg | 25 | |||
Oil Tank Capacity | L | 280 | |||
1. SPECIFICATIONS
The GS injection molding machines employ a variable pump plus closed loop feedback,
which offers stable control of shot size, the accuracy of resin quantity and the increase of the production of acceptable products.
Advantages:
(1) Energy saving
(2) High speed system response with short moulding cycles
(3) Significant working life of the hydraulic oil and hydraulic components, thereby reducing frequency of maintenance and maintenance costs
(4) The extra oil filtration requirements are met by special imported filter components
2. Production description
CONTROL SYSTEM
All-digital control system uses dedicated controller, multiple CPU
processing division,
a multi-functional automatic fault detection, alarm system,
certificates 99 mold of
processing procedures, with remote control interface. System is of
high stability and
responsiveness. System uses color LCD, man made interface for easy
operation and
with a number of peripheral interfaces.
FEATURES
- A variety of text can be switched.
- Manual, semi-automatic and fully automatic mode.
- To provide EUROMAP robot interface.
- Automatic movement monitoring with alarm and fault diagnosis.
- Function of slope setting can set the start and stop of
movements, so as ensure the smooth movement
INJECTION SYSTEM
2005, diversified screw optimal design municipal science and technology research projects focus on key issues is completed, and is now designed professionally and production for a whole variety of raw material.
the diversity of the screw is for your option.
FEATURES
- There are three or four screws and barrels with optimal design, respectively, nitride, hard plating, dual-metal, which is suitable for different processes of a variety of plastics. and the choice of product.
- Two-guided guided bar supports, double-balanced rapid injection.
- The high-torque hydraulic motors offer a stable plasticizing capacity, highprecision electronic device position detection enable accurate measurement.
- Multi-injection speed and pressure and multi-level holding pressure settings, switch from the injection time, location, pressure control to ensure the quality of molding.
- Multi-level back-pressure of pre-plastic and pre-speed are computer-controlled, anti- drooling and automated auto purge.
- Expected to prevent cold-start function to ensure that the screw, Liao Tong will not be harmed. Stability of the injection unit.
