Active Member
|
[China]
Address: No.888, Kungang Rd, Songjiang Sci. & Tech. Park, Shanghai, P. R. China
Contact name:Vivian Chen
shanghai Guangsu Manufacture Co.ltd |
|
|
Product details
1 LCD computer control with big display screen
2 Hydraulic proportional valve
3 Generous space for fitting large moulds
4 Two positon transducers to control clamping and injection
5 4-stage of injection speed, 3-stage of holding pressure, 4-stage of metering phase can be setup according to products' requirement.
6 Optimal platen design, with toggle junction casting together with platen improves rigidity of mechanical system hence improves product dimensions accuracy
7 Screw and barrel are made of high quality new materials, which extended the service life
8 Multiple hydraulic ejection
9 Differential area high speed clamping
10 All hydraulic components and seals are offered by famous international manufacturers
11 Electrical safety interlock
Specification:
|
| GS1608HS | ||||
A | B | C | D | |||
INJECTION UNIT | Screw Diameter | mm | 65 | 70 | 75 | 80 |
Screw L/D Ratio | L/D | 21.5 | 20 | 18.7 | 17.5 | |
Shot Size(Theoretical) | cm3 | 1068 | 1239 | 1423 | 1619 | |
Injection Weight | g | 972 | 1127 | 1295 | 1473 | |
Injection Rate | g/s | 292 | 339 | 389 | 443 | |
Plasticizing Capacity | g/s | 38.2 | 44.9 | 51.4 | 58.7 | |
Injection Pressure | Mpa | 213 | 184 | 160 | 141 | |
Screw Speed | rpm | 0-185 | ||||
CLAMPING UNIT | Clamp Tonnage | KN | 3800 | |||
Toggle Stroke | mm | 700 | ||||
Space Between Tie Bars | mm | 730*730 | ||||
Max.Mould Height | mm | 730 | ||||
Min.Mould Height | mm | 280 | ||||
Ejector Stroke | mm | 180 | ||||
Ejector Tonnage | KN | 110 | ||||
Ejector Number | piece | 13 | ||||
OTHERS | Max.Pump Pressure | Mpa | 17.5 | |||
Pump motor Power | KW | 37 | ||||
Heater Power | KW | 24.85 | ||||
Machine Dimension(L*W*H) | m | 7.36 x 1.96 x 2.15 | ||||
Machine Weight | t | 15 | ||||
Hopper Capacity | Kg | 50 | ||||
Oil Tank Capacity | L | 750 | ||||
Features
Injection speed up to 120 mm/s(high),product quality REpaetability ≤ 0.05 %(precision),the whole energy-saving level up to the national standard,barrel heating energy saving 30~50%(energy);
Using high-performance screw barrel assembly;
Control system responds faster,higher sensitivity and reproducibility,good stability,anti-interference ability,low power consumption,the closed-loop control;
Maintenance is simple,low maintenance cost and long servise life;
GS-HS plastic injection machine of oil-electric compound system control series is the product newly developed by Guangsu Company with feature of economic benefits,energy saving,high response and low noise.
Structure principle during actual working status,the system directly feedbacks the pressure-flow rate singal through exit pressure sensor of oil pump and cycloscope to the high speed servo driver.The servo driver gives out electric signal to servo driving motor and oil pump,allowing of corresponding change to pressure and flow rate,therefore,theclosed clrcuit control of pressure and flow rate is realized.
Delivery time:
45 days upon deposit and approval to the bottle drawing.
Guarantee:
We are response for one year warranty for the machine, however, it without any human conduct. And provide one-year free spare part for client. We will send engineer to client’s company to help installing the machine, teaching their staff operating the machine and also, we do have a private school which helping our client sending their staff to china, help them training.
After sales service:
The buyer pays travel expenses, hotels, airfares, meals and ground transportation and any other expenses related to installation and training at customers’ facility.
Description:
We all do best try to make products perfect!
