shanghai Guangsu Manufacture Co.ltd |
|
Full Automatic Plastic Cup Making MachineGS98V
|
|
| GS98V | ||
A | B | C | |||
| Screw Diameter | mm | 32 | 36 | 40 |
Screw L/D Ratio | L/D | 22.5 | 20 | 18 | |
Shot size(Theoretical) | cm3 | 121 | 153 | 188 | |
PS) Injection Weight | g | 110 | 139 | 171 | |
PS Injection Rate | g/s | 66 | 84 | 104 | |
PS Plasticizing capacity | g/s | 9.9 | 11.3 | 13.9 | |
Injection Pressure | Mpa | 237 | 188 | 152 | |
Screw Speed | Rpm | 0-205 | |||
| Clamp Tonnage | KN | 900 | ||
Toggle stroke | mm | 320 | |||
Space Between Tie Bars | mm | 360*360 | |||
Max.Mold Height | mm | 380 | |||
Min.Mold height | mm | 150 | |||
Ejector stroke | mm | 100 | |||
Ejector tonnage | KN | 33 | |||
Ejector Number | piece | 5 | |||
| Max.Pump Pressure | Mpa | 17.5 | ||
pump motor power | KW | 7.5 | |||
Heater Power | KW | 6.2 | |||
Machine Dimension(L*W*H) | m | 4.32*1.2*1.86 | |||
Machine Weight | t | 3.46 | |||
PS Hopper Capacity | Kg | 25 | |||
Oil Tank Capacity | L | 240 |
Features:
1) All computer control system
2) Super silence hydraulic circuit
3) High speed and high-pressure injection, ideal for high precision
and thin walled molding products
4) Real-time injection process curve display
5) Enlarged clamping stroke to meet with larger stroke requirements
6) 4-stage of injection speed, 3-stage of holding pressure, 4-stage
of metering phase can be setup according to products'
requirements
7) Optimal platen design, with toggle junction casting together
with platen improves rigidity of mechanical system hence improves
product dimensions accuracy
8) Screw and barrel are made of high quality new materials, which
extended their working life
9) All hydraulic components and seals are offered by famous
international manufacturers
The GS-V plastic injection machine with variable pump series is the
fine product of energy saving of Guangsu Company, which adopt the
advanced international control technology of variable pump. The
product adopts high response proportional variable system, making
the output power of hydraulic system of plastic injection machine
matching with the actual consumption, avoiding the loss of high
pressure regulated flow and overflow. Compared to the machine with
common constant flow pump, 30%50% electricity can be saved, showing
obvious economic benefits.
In addition, the heat produced by the machine is low, reducing
around 30% cooling water consumption, reducing noise around the
machine, extending the service life of hydraulic seals of oil
circuit and hydraulic oil, reducing greatly the use and maintenance
cots of machine, at same time, the strict global
environment-friendly requirements are satisfied. The GS-V plastic
injection machine with variable pump series brings obvious economic
benefits to wide customers relying on its excellent
performance.
The oil temperature of system reduces greatly the produced heat;
Reduce the mold opening/closing impact, extending the service life
of machine and mold;
Extend the service life of oil circuit system, reducing maintenance
times, and saving large amount of maintenance cost;
High accuracy demand on hydraulic oil; and high accuracy return
filter is provided.
1.Q:Are you a factory or trading company?
A: We are a factory.
Service:
Provide whole drawing for the perform mould and bottle mould. Free
charge for word design on the mould. We can help you install the
machine; from setting machine, testing, and to check the machine is
on the good working condition. There is a litter charge, only for
flight charge and accommodation.
Delivery time:
45 days upon deposit and approval to the bottle drawing.
Payment:
For machine:50% T/T deposit within five days after the contract is
signed against invoice of the seller. The balance of 50% will be
paid before shipmment.