|
[China]
Trade Verify
Address: Rm1803 , BlockA Changjiang International Building , No.731, Mingzhou Rd, Beilun Area , Ningbo 315608, Zhejiang ,China
Contact name:Goya
Ningbo Tigerlevel Plastic & Hardware Industrial Co.,Ltd |
|
Verified Suppliers
|
|
|
stainless steel ACR welding studs /welded studs
size from M3-M12
Mild steel, stainless steel and aluminum are applicable materials
for Arc Welding.
1: A fastener and ceramic ferrule are firmly placed against the
work surface under spring tension.
2: Upon triggering, the weld gun automatically lifts the fastener
from the base metal and initiates a controlled electric arc - which
melts the end of the fastener and a portion of the base metal.
3: A ceramic arc shield concentrates the heat and retains the
molten material in the weld area for maximum weld strength and
reliability.
4: At the precise moment the fastener and the parent metal become
molten, the fastener is automatically plunged into the work
surface. The metal solidifies and a high quality fusion weld is
completed.
HOW STUD WELDING WORKS.
Process. The process involves an arc being ignited, between the
face of the stud, and the surface of the work piece. Once both
parts are melted, the stud is smoothly pressed against the work
piece and joined together. Welding elements like threaded studs,
pins, tapped pads, etc. are welded by an arc without additional
material being required. As the stud is joined with the work piece
over the whole surface of the stud, the strength of the joint is
even higher than the base material or the stud.
Did you ever wonder why stud welding was invented?
Here are some of the reasons why the technology was created:
Through Bolting
Requires two handed assembly and access from both sides. Holes need
to be punched and deburred in parent material. Bolt heads are
unsightly and stains can come from the bolt holes. The assembly is
not leak-proof and the parent material is weakened by the presence
of the holes.
