Active Member
|
[China]
Address: No. 28 Datong Road, Xuguan Town, Suzhou New District, P. R. China, Suzhou, Jiangsu, China
Contact name:Kaisa
Bohyar Engineering Material Technology(Suzhou)Co., Ltd |
|
|
Inner mounted pipe beveling machines can be tightened to the internal wall of the pipe end, drive the cutter head to rotate through multi-stage planetary reducer and then bevel small-diameter pipes. The applicable inside diameter of pipes for our pipe beveling machine is up to 240 mm (if the pipe to be beveled is larger than this scope, please choose our split frame machines).
Structure
Technical Parameters
| Brand | Bohyar |
| Model | BPP6E |
| Drive Mode | Electric |
| Electric requirement | 220-230V 1PH 50/60HZ |
| Power | 1.43KW |
| Application Range (I.D.) | 65-159mm |
| Wall Thickness | ≤20mm |
| Rotating speed | 34rpm |
| All standard accessories included | |
*Electric: Rated voltage of 220V, 50/60Hz
■ Compact structure and good appearance, high strength aluminum body
■ Lightweight and high-strength aluminum - ensure portability.
■ Interchangeability of components - allows accessories & tool slides to mount to multiple ring sizes
■ Cold machining - no heat affected zones.
■ Precision-manufactured tool slides - ensure absolute rigidity.
■ Quick installation, positioning the machine in the center of the tube and install the appropriate tool to complete the preparation.
■ Well-adapted, you can make the speed adjust depend on the working conditions.
Installation & Processing
■ During installation, the tools should not touch the feed spindle and the expansion block.
■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.
During installation, the tools should not touch the feed spindle and the expansion block.
■ The expansion block should not be stretched too deep into the pipe and keep about 20 mm from the pipe end face.
■ During processing, control the feed speed based on cutting conditions to avoid damage of blades and parts in the machine; In case of vibration of the machine or uneven bevel face, timely tighten the expansion hand wheel to prevent the looseness of the expansion, which may cause damages to the machine.
Safety is our priority when pipe beveling machines are designed, and ergonomics is also taken into consideration to ensure product safety and reliability.
■ Before operation, please carefully check for loose connections, blocked rotating parts, or any damage and other factors that may affect the operation or lead to hidden dangers.
■ The applicable scope of the machine should be strictly followed for pipe processing.
■ Do not touch electric switches and buttons with wet hands to avoid electric shock.
■ Before operation, ensure the operators are kept away from any live part such as motors and cables.
■ The machines should not be operated outdoors when it rains.
■ Before disassembly or replacement of cutting tools, please ensure the machines are cooled down to the safety temperature to prevent from burning.
■ It is strictly forbidden to transform the machines or replace accessories with those not produced by the original manufacturer without approval.
