Plastic PVC Powder Horizontal Type High Speed Hot and Cold Mixer
Unit Machine
The development and optimization of the coolers of mixing plant is
the latest innovation launched by MagStar and has been welcomed
with great interest.
Thanks to MagStar, today it is a straightforward task to cool over
8 batches per hour of U-PVC from 120°C to 40°C.
The new water circuit design increases cooling efficiency enabling
a significant increase in the productivity of the cooler and,
therefore, the mixing plant.
The new cooling interspace can withstand a working pressure of 2.5
bar, a typical pressure of factory closed circuit chillers. This,
in addition to increasing the efficiency of heat exchange, solves
many critical issues typical of closed circuit chillers.
The MagStar technical team has developed this innovation through
close collaboration with its customers and by systematically
analyzing and comparing data in order to create new ideas and
continuously innovate our products
They are the ideal solution in the transformation industry when
good quality thermoplastic material must be combined with high
hourly throughput.
Features of Plastic PVC Powder High Speed Hot and Cold Mixer Unit
Machine(Horizontal Type)
- The range of coolers used for this combination, can be applied to
any type of turbomixer and this is the ideal solution for all
manufacturing needs in the field of rigid or plasticized PVC
dry-blend.
- This cooler is built entirely of stainless steel as regards the
parts in contact with the material, double jacket for circulation
of cooling water.
- MagStar specially designed the temperature point in the pot to
directly contact the material to prevent the material from running
below the set temperature. This ensures product quality, increased
production flexibility, safety and reliability.
- Available with capacities from 1000 up to 8.500 lt., the
cooler stands out for its great and proven cooling efficiency,
allowing excellent throughput and high standards of quality.
- Improved cooling efficiency: rigid PVC (profile) 120 – 40°C,
8batchs/hour.
Main Technology of Platisc PVC Powder Hot and Cold Mixer Unit
Machine (Horizontal Type)Model | SRL-W300/1000 | SRL-W500/1500 | SRL-W800/2000 | SRL-W1000/3000 | SRL-W1600/4000 |
General Cubage (L) | 300L/1000L | 500L/1500L | 800L/2000L | 1000L/3000L | 1600L/4000L |
Effective Cubage(L) | 225L/700L | 330/1000L | 600/1500L | 700/2100L | 1200/2700L |
Stirring Paddle Quanlity | 3/1 Pieces | 3/1 Pieces | 3/1 Pieces | 3/1 Pieces | 3/1 Pieces |
Main Motor (kw) | 40/55/7.5 kw | 55/75/15kw | 83/110/22kw | 110/160/30kw | 83/220/30kw |
Mixing Time (RPM) | 8-10 min | 8-10min | 8-12min | 8-12min | 8-12min |
Rotating Speed | 475/950/80 | 430/860/70 | 370/740/60 | 300/600/50 | 350/700/65 |
Size (L*W*H,mm) | 2500*2000*2200 | 4590*2240*2480 | 4800*2660*2500 | 5600*3100*3150mm | 6250*4300*4500 |
Capacity (kg/h) | 500 | 850 | 1300 | 1600 | 2600 |
How to find one set of good quality plastic mixer unit
machine?
- First, power consume is key point of plastic mixer unit, in
normal, manufacturers always offer two type of mixer units to
you as options, one type is double speed motor , another one type
is single speed motor with inverter . Inverter controll type
will help you saving much power consume cost in the running
process.
- Second, we should check the the wall of the high speed mixer barrel
is made of 8mm SUS304 stainless steel and with fine polishing, and
the cover should be casting alumimum.
- Main shaft bearing and cover should be double sealed for
there is no material dusty leakage.
Magstar Machinery makes Plastic Powder Hot & Cold Mixer
Machine in China
Established in 2008, we, Magstar Machinery, are one of the most
accomplished manufacturers of Plastic Mixing Machine, PVC Pipe
Belling Machine, PVC Pipe Slotting Machine and PVC Pipe Thread
Cutting Machine and much more. Our products are well known for
their durability, strength, and high accuracy. These products are
available with customized required from our valuable customers.
PVC mixer machine is a necessary machine for the PVC pipe
manufacturing process and PVC granulator, PVC compounding recipe is
made by yourself, if you do not have, we also supply our recipe to
you by our engineer. Magstar has high speed mixer with production capacity from 100kg/h to
1500kg/h, we use ABB inverter and Siemens motor in the mixing unit
which can reduce power consumption for you.
Our product of plastic powder mixing machine is manufactured
using top quality raw material and famouse brands parts which has
enabled us in delivering quality machines to our customers. Mixing unit machine also includes the screw loader, our cooling
tank is use recycling water to cooling the formulation, the water
will be circled to use which can reduce wastewater.
In order to deliver quality machines to our clients, our machines
are all made according to customized requires .
these products are stored under proper warehousing facilities
ensuring that the products are in a safe environment. Our
proficient team members also ensure that the products meet the set
standards of durability & efficiency and are also delivered on
time.