Home Companies Hangzhou Freqcontrol Electronic Technology Ltd.

Seedless Z Cut Crystal Quartz Wafer 3 Inch Double Side Polished

Hangzhou Freqcontrol Electronic Technology Ltd.

Contact Us

[China] country

Trade Verify

Address: Room 1106, CIBC, No.198 Wuxing Rd, Hangzhou, P.R.China

Contact name:Xu

Inquir Now

Hangzhou Freqcontrol Electronic Technology Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Seedless Z Cut Crystal Quartz Wafer 3 Inch Double Side Polished

Country/Region china
City & Province hangzhou shanghai
InquireNow

Product Details

Seedless Z-Cut Crystal Quartz Wafer 3inch to 8inch Double Side Polish

 

You can buy Quartz wafer for SAW components from BonTek. We are a leading quartz wafer supplier in China. There are three common shapes of quartz wafers: round, square, or rod type (also square, but relatively small). When the orientation is different, its piezoelectric characteristics, elastic characteristics and strength characteristics will be different. The performance of the resonator is different when using quartz wafer substrates with different orientations to make.


 

MaterialOptical Grade, Piezo Grade
Q-Value2.4x10^6 to 3.0x10^6 IEC standards
ECDMax 2 /c㎡, 10/c㎡, Max 30/c㎡, Max 100/c㎡; Swept Quartz
Inclusions DensityIa, Ib, I, II Grade
SweptBoth Pure Z and Y Bar available

 

Diameter3” (76.2mm)4” (100mm)6” (150mm)8” (200mm)
Thickness0.08mm up0.10mm up0.20mm up0.35mm up
Primary Flat22mm32mm42.5mm57.5mm or notch
SurfaceBow-30<bow<30Warp<40µm
Surface TypeSSP / DSPTTV<1.5~3 µm
Polished sideRa<0.5nm or per requestedBack Side0.2-0.5µm or as customized


 

FAQs:

 

  1. Q: What are the products you mainly work on?

A: We look at ourselves as the piezo wafer specialist. We are the very first to work with Single Crystal Quartz in China about 30 years ago. Then gradually we step in the field of LiNbO3, LiTaO3, Quartz glass, LGS, CTGS etc. Especially, if you are looking for a piezo quartz supplier, we are the ultimate choice! We export millions of quartz blanks each year because we master the AT, SC and IT cuts with superior angle precision.

  1. Q: Can we visit your factory?

A: Sure. Factory inspection is important for large quantity purchase and long-term cooperation. Face to face discussion is what we mostly confident with. During the past years, big names around the world have witnessed our progress in factory build-up. These days, due to the Covid-19 pandemic, we also had the experience of videoconferencing with global buyers.

 

 

Acceptance Check

 

  • The product is fragile. We have adequately packed it and labeled it fragile. We deliver through excellent domestic and international express companies to ensure transportation quality.

 

  • After receiving the goods, please handle with care and check whether the outer carton is in good condition. Carefully open the outer carton and check whether the packing boxes are in alignment. Take a picture before you take them out.

  • Please open the vacuum package in a clean room when the products are to be applied.

 

  • If the products are found damaged during courier, please take a picture or record a video immediately. DO NOT take the damaged products out of the packaging box! Contact us immediately and we will solve the problem well.

Hot Products

Customized Piezoelectric Single Crystal Quartz Wafer 2inch 3inch 4inch 6inch 8inch per request ...
X-cut Y-cut Crystal Quartz Ring IEEE standard Double Side Lapped for Pressure Sensor There are a ...
BonTek BT DT Cut 4 Inch Crystal Quartz Wafers All single crystal quartz wafersshould be growthn from ...
BonTek Optoelectronics 3 Inch 4 Inch Quartz Wafers With Customised Orientation Quаrtz wafer hаvе mаn...
BonTek X Cut Quartz Ring For Pressure Sensing Y Cut For Thickness Shear There are a variety of ...
3 Inch 4 Inch Single Crystal Quartz Wafer AT-Cut ST-Cut for SAW and MEMS BonTek Optoelectronics ...