|
[China]
Trade Verify
Address: Room 1106, CIBC, No.198 Wuxing Rd, Hangzhou, P.R.China
Contact name:Xu
Hangzhou Freqcontrol Electronic Technology Ltd. |
|
Verified Suppliers
|
|
|
UV grade Fused Silica Wafer customized Diameter Thickness JGS1 JGS2 JGS3
BonTek works on a variety of glass and quartz materials depending on the application and requirements. The most used are three types of China made quartz glass, classified by their transmission range into JGS1 for UV-VIS range, JGS2 for VIS range, and JGS3 for UV-VIS-NIR range.
Apart from these, we also fabricate glass materials from Corning (7979, 7980, Eagle XG, Gorilla), Schott (BF33, Pyrex, MEMpax, B270, D263T, Zerodur), Ohara (SK1300), Heraeus, GM (H-K9L) etc.
Material | UV Fused Silica, Fused Quartz (JGS1, JGS2, JGS3) | ||||||
Specification | unit | 3” | 4” | 5" | 6" | 8" | 12" |
Diameter (or Square) | mm | 76.2 | 100 | 125 | 150 | 200 | 300 |
Tol(±) | mm | <0.1~0.25 mm | |||||
Thinnest Thickness | mm | >0.10 | >0.10 | >0.30 | >0.30 | >0.30 | >0.50 |
Primary Flat | mm | 22 | 32.5 | 42.5 | 57.5/notch | notch | notch |
LTV (5mmx5mm) | µm | <2 | <2 | <2 | <2 | <2 | <10 |
TTV | µm | <8 | <10 | <15 | <20 | <30 | <30 |
Bow | µm | ±20 | ±25 | ±40 | ±40 | ±60 | ±60 |
Warp | µm | <30 | <40 | <50 | <50 | <60 | <60 |
PLTV(<0.5um) | % | ≥95%(5mm*5mm) | |||||
Transmittance |
| UV, Optical, IR or Custom option | |||||
Edge Rounding | mm | Compliant with SEMI M1.2 Standard/refer to IEC62276 | |||||
Surface Type |
| Single Side Polished /Double Sides Polished | |||||
Polished side Ra | nm | <1.0nm or specific per requested | |||||
Back Side Criteria | µm | General is 0.2-0.5µm or as customized | |||||
Appearance | Contamination | None | |||||
Particles>0.3µm | <=30 | ||||||
Saw Marks, striations | None | ||||||
Scratch | None | ||||||
Cracks, saw marks, stains | None | ||||||
FAQs:
A: We look at ourselves as the piezo wafer specialist. We are the very first to work with Single Crystal Quartz in China about 30 years ago. Then gradually we step in the field of LiNbO3, LiTaO3, Quartz glass, LGS, CTGS etc. Especially, if you are looking for a piezo quartz supplier, we are the ultimate choice! We export millions of quartz blanks each year because we master the AT, SC and IT cuts with superior angle precision.
A: Yes, of course. We can fabricate as per your request. In addition, we are so experienced with piezo wafers that we can provide you relevant suggestions if you are not 100% sure about your choice. Besides, we do have some standard wafers in stock, please check with us.
A: Yes, we would suggest you go with the courier agent you are most familiar with (DHL, FedEX, UPS etc.). We can ship via your account. And, of course, we will pack the products safely in acceptable size to help you save the shipping cost. If you need us to take care of the freight, it’s also not a problem. We also have good discount with the international courier companies.
A: The wafer products are fragile and sometimes expensive. The last thing, as the manufacturer, we want to see is the products we make were damaged during courier. As a result, we will pack the wafers adequately and put them in a proper carton filled with buffer sponge. However, accidents are inevitable sometimes. So, please follow the “Acceptance check” steps shown in the drawings below. If the unwanted happened, we will either give the replenishment or refund if you follow the checking steps.
A: Sure. Factory inspection is important for large quantity purchase and long-term cooperation. Face to face discussion is what we mostly confident with. During the past years, big names around the world have witnessed our progress in factory build-up. These days, due to the Covid-19 pandemic, we also had the experience of videoconferencing with global buyers.
Acceptance Check
