|
[China]
Trade Verify
Address: Suzhou Xupai Road No.3
Contact name:Yuki Fu
Suzhou Delfino Environmental Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
ISE Principle Fluoride Ion Analyzer Online Monitoring Without Reagents IP66 24V
The main sources of fluorine pollution in the water environment are fluorine-containing waste gas, waste liquid and waste residues discharged from industrial production. Such as aluminum electrolysis, steel, cement, bricks, ceramics, phosphate fertilizers, glass, semiconductors, pharmaceuticals, etc.
It is very important to detect fluoride ions in water bodies.
Measuring Principle
The principle of ion selective electrode is adopted to measure the corresponding potential difference corresponding to the fluoride ion concentration in the water.
Advantages Of The Fluoride Ion Analyzer
1. There is no need to add any reagents during the detection process and there is no secondary pollution.
2. Abundant output meets monitoring, dosing control, and remote transmission of data signals at the same time
3. The fluoride ion analyzer has 2 SPST multi-function relays, 2 high-precision 0/4~20mA current output.
4. The fluoride ion controller has 128*64 large screen graphic dot matrix LCD screen, display in Chinese and English, rich in content.
5. RS485 and Modbus RTU communication are supported. Menu password can be set to facilitate hierarchical management.
Application Of The Fluoride Ion Analyzer
It can extensively monitor the fluoride ion concentration in water bodies discharged by rivers and lakes, surface water, water plants, sewage treatment plants, and enterprise wastewater.
Technical Parameters
| Product Name | Fluoride ion analyzer |
| Product Model | APF1-H2D |
| Software Version | DRFN ion electrode analysis software V1.0 |
| Fluoride Range | 0.02~20mg/L |
| ORP Range | ±2000mV |
| TEMP Range | -10～150℃ /14~302℉ |
| Fluoride Resolution | 0.01mg/L |
| ORP Resolution | 1mV |
| TEMP Resolution | 0.1℃/ 0.1℉ |
| Accuracy | 3% of the measuring range |
| Stability | 1% of the measurement range every 24 hours, no accumulation |
| Repeatability | Better than 1% of the measurement range |
| Relay Control | 2 configurable SPST relays with a maximum relay load of 3A/250VAC |
| Analog Current Output | 2 settable 0/4~20mA active current loop outputs with a maximum load of 1000 Ω |
| Communication Method | Two-wire RS485 interface, communication protocol: MODBUS RTU; support JSON text data format |
| Display Screen | 128*64 black and white graphic dot matrix LCD display with adjustable backlight mode and adjustable display rate |
| Configuration Information | Power failure protection with indefinite parameter retention |
| Protection Level | IP66 |
| Operating Environment | 0～60℃, less than 95% RH(no condensation) |
| Storage Environment | -20～70℃, less than 55% RH(no condensation) |
| Dimensions | 100*100*120mm |
| Material | enhanced ABS |
| Installation Method | panel (hole size 92*92mm) |
| Electrical Interface | The back end of the instrument is reserved for 3 M12*1.5 gland, wire diameter 3~6.5mm |
| Power Supply | 18~36V DC |
| Power Consumption | About 7W |
| Instrument Weight | About 500g |
If you are interested in the online fluoride ion analyzer, please contact us.
