Home Companies Suzhou Delfino Environmental Technology Co., Ltd.

OTA Online Digital Total Suspended Solids Sensor For TU Measurement

Suzhou Delfino Environmental Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Suzhou Xupai Road No.3

Contact name:Yuki Fu

Inquir Now

Suzhou Delfino Environmental Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

OTA Online Digital Total Suspended Solids Sensor For TU Measurement

Country/Region china
City & Province suzhou
Categories Electrical Instruments
InquireNow

Product Details

 

OTA Online Digital Suspended Solids Analyzer Infrared Sensor For Measurement Of TU

 

 

Brief Introduction

 

The DUC2-SS-S suspended solids analyzer uses an optical method for determining the turbidity suspended solids, a light beam is directed into the sample where it is scattered by suspended particles in the water. The amount of scattering depends on the amount of material in the water, the wavelength of light used and the size and composition of the suspended particles.

 

The matched SS sensor is OPSS800, OPSS800 digital infrared suspended solids sensor is based on the 90-degree infrared scattering method of ISO7027 standard, which measures the value of suspended solids of the sample according to the intensity of the scattered light of suspended particles in the water sample. 

 

 

 

Advantages Of The Suspended Solids Analyzer

 

suspended solids controller

 

This DUC series of suspended solids (sludge concentration) analyzer can stably collect the data uploaded by the sensor in a special encrypted communication method, and display the data in real-time on the display screen, which is convenient for users to read.

 

128*64 large-screen LCD display, Chinese and English language display, rich content, to meet the different needs of users.

 

The enclosure protection grade of the SS meter is IP66. This material can effectively isolate the pollution and corrosive gas from the external environment. 

 

suspended solids sensor

 

The unique protective structure design of the Infrared Suspended Solids Sensor detection surface can protect the sensor detection window to the greatest extent and avoid accidental collisions during installation and use to damage the sensor measurement surface

 

Protected measurement window design to prevent accidental damage to the sensor.

 

Support up to 10 points of calibration, can accurately measure the turbidity value.

 

The sensor stores the calibration parameters internally, supports offline calibration and plug-and-play.

 

The main material of the SS sensor is stainless steel and POM, which is strong and sturdy.

 

 

Applications Of The Suspended Solids Analyzer

 

Industrial wastewater treatment, municipal sewage treatment, river and lake monitoring, and other fields.

 

 

Technical Parameters

 

Product Name

Suspended Solids analyzer

Product Model

DUC2-SS-S

Software Version

DRFN SS (sludge concentration) Analysis software V1.0

Turbidity Display Range

0.01mg/L~100g/L

Turbidity Resolution

0.01mg/L

Relay Control

2 settable SPST relays max. load 3A/250VAC

Analog Current Output

2 settable 0/4~20mA active current loop output max. load 1000Ω

Communication Method

Two-wire RS485 interface; MODBUS RTU; support JSON text data format

Display Screen

128*64 LCD, adjustable backlight mode

Time History/Data Record

Year/month/day/hour/min/second, record 14000 historical data

Protection Level

IP66

Operating Environment

0~60℃, relative humidity less than 95% (no condensation)

Storage Environment

-20~70℃, relative humidity less than 55% (no condensation)

Shell Material

Enhanced ABS

Size

144*144*120mm (hole size 138*138 mm)

Mounting Method

Wall mounting, pipe clamping, panel mounting

Power Supply

100-240V AC or 18-36V DC

Weight

800g

Power Consumption

12W

 

 

Product NameInfrared suspended solids sensor
Product ModleOPSS800
Measure Range0~3000mg/L
Resolution1mg/L
AccuracyLess than 5% of the measured value
Measuring PrincipleInfrared scattering principle independent of color
Calibration MethodActivated sludge calibration, diatomite calibration, linear calibration
Operating Temperature0.0~45.0℃
Working Pressure≤0.4Mpa
DimensionsDiameter: 52mm, length: 195mm
Materialstainless steel+POM
WeightApproximately 700g (without cable)
Power Supply12VDC, power consumption about 50mA
Light Source850nm infrared light source

 

 

 

Hot Products

220V Chlorine Tester OTA Technology For Aquarium 144 * 144 * 120mm Brief Introduction The chlorine ...
Universal Disinfection Residual Chlorine Controller Used Under 4 ~ 9pH Introduction In the water ...
BlueUnite App Portable PH ORP Meter Multifunctional Analyzer Introduction The i-Blueunite APP is a ...
24VDC IP66 Industrial Online PH ORP Transmitter With 2 SPST Relays pH ORP transmitter are widely ...
14pH Online ORP PH Transmitter Accurate PH Meter For Continuous Measurement When the ratio of OH- in ...
PH / ORP Controller For 2 Sensors RS485 Dual Channel Analyzer For Water Quality Introduction Of The ...