Shenzhen Times Starlight Technology Co.,Ltd |
Verified Suppliers
|
|
Vehicle Cell Phone IED GPS Signal Jammer Remote Control Car GPS Blocker
Introduction
The high power jammer is designed for blocking remote controlled improvised explosive devices used by terrorists.
The Blocker is using state-of-art technology for maximum performance and jamming the signals transmits to activate bombs.
Jamming radius of the jammer depends on several conditions such as transmitter frequency and output power, distance to receiver, and obstacles between, etc.
The system use Broadband Omni-Directional antennas for 360º protection.
Because of the variety of jamming targets and a wide range of uncertainties, we have adopted the more advanced and effective jamming signal modulation method, which will increase the jamming efficiency in each band, so that to provide security protection and ensure the safety of VVIPs.
Product Description
TSL-VM1 is a High Power DDS Convoy Jamming System, implementing the
most effective and reliable RF jamming technology and equipped with
a fully-integrated broadband jamming system.
1. Designed with ultra broadband frequency bands,
20MHz-3600MHz (20-6000MHz).
2. 12 modules plug and play design, facilitate for future
power upgrading, change and maintenance. Any ruin on the modules
never interfere the normal operating of other modules.
3. American Mil-spec standard case, shockproof and
drop-resistance, available for the vehicle running in a worse field
environment.
4. Up to 20 Frequency Bands. All Jamming Modules Designed by
DDS technology.
5. Operators are able to regulate the working frequency band
and output power of each module through the software. Configuring a
specific frequency band can ensure the internal communication in
emergency.
6. System operation can be performed in the driver's console
unit. Each module can be ON/OFF. Backup battery or generator system
can be optional.
7. Continuously and simultaneously interference to the common
used RF signals.
8. Equipped with high power generator to ensure excellent low
noise operational capabilities.
9. Integrated backup battery system for continuous silent
operation and fast start.
10. Integrated smart active cooling system to make sure the
device working continuously.
11. Antenna is installed with a covert design.
12. Video camera with LCD monitor both inside and outside the
vehicle provide rear viewing and monitoring
Protecting military and VIP convoys from the threat of Remote
Control Improvised Explosive Devices (RCIEDs)-road-side bombs has
become a challenge and task in many parts of the world.
The Jammer is a vehicle mounted very high power jammer designed for
blocking remote controlled improvised explosive devices(RCIED) Used
by terrorist.
The Jammer is using state-of-art technology for maximum performance
and jamming the signals transmits to activate bombs.
Jamming radius of the Jammer depends on several conditions such as
transmitter frequency and output power, distance to receiver, and
obstacles between, etc.
Features
1. Using DDS Jamming technology to make the Frequency setting more
precise
2. High efficient output power, long jamming radius
3. Slow start up design of circuit to make the device work
stably.
4. Perfect Self Protection, Over Heat protection, Over current
protection, High input Voltage and low Voltage protection, VSWR
protection
5. Easy operation, using Wire Control Panel to monitor the system
Applications
1. Military Convoy
2. VIP Protection
3. RIOT Control
4. S.W.A.T Team
5. EOD Operations
6. Electronic countermeasure, etc
Power Amplifier Protection
A. Over Heat protection Thermal protector
B. Over current protection
C. High input Voltage and low Voltage protection
D. VSWR protection: against antenna miss-match including open and
short circuit
Remote Control
Wire Control Panel available
A. Output power LCD Indication
B. Output power adjusting by LCD
C. Output power on/off per band
D. Jamming frequency setting by LCD Panel
Specifications:
Output Band | Frequency | Output power | Jamming range |
Channel 1 | 20-80MHz | 100 Watts | 5-500 meters |
Channel 2 | 80-200MHz | 100 Watts | 5-500 meters |
Channel 3 | 200-500MHz | 100 Watts | 5-500 meters |
Channel 4 | 500-1000MHz | 100 Watts | 5-500 meters |
Channel 5 | 1000-1500MHz | 100 Watts | 5-500 meters |
Channel 6 | 1500-2000MHz | 100 Watts | 5-500 meters |
Channel 7 | 2000-2500MHz | 100 Watts | 5-500 meters |
Channel 8 | 2500-3000MHz | 100 Watts | 5-500 meters |
Channel 9 | 870-880MHz | 100 Watts | 5-500 meters |
Channel 10 | 935-960MHz | 100 Watts | 5-500 meters |
Channel 11 | 1805-1920MHz | 100 Watts | 5-500 meters |
Channel 12 | 2010-2125MHz | 100 Watts | 5-500 meters |
Channel 13 | 2110-2155MHz | 100 Watts | 5-500 meters |
Channel 14 | 3000-4000MHz | 25 Watts | 5-300 meters |
Channel 15 | 4000-5000MHz | 25 Watts | 5-300 meters |
Channel 16 | 5000-6000MHz | 25 Watts | 5-300 meters |
Optional | Frequency of each band can be customized RF out put power can be custmized | ||
Warranty | One year from delivery date | ||
Power supply | 50 to 60Hz, 100 to 240V AC, With AC adapter | ||
Packing list | Mainframe*1, Antenna*1, Power supply*1, Control panel*1 |