|
[China]
Trade Verify
Address: Building No.2,709 Room hongjie tiancheng,jiang gan District.
Contact name:wendy
Hangzhou Philis Filter Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Quick Detail:
High filtration efficiency ,long service life
Good anti abrasion
High temperature grade
Anti acid ,anti alkali, chemical resistance
High porosity , good air permeability
Good price quality
Laminated compound, grads counterchange
Description:
Acid and alkali Resistance, corrosion resistance,aging resistance
Can be used under high humidity environment
Low shrinkage rate even if under high temperature 260℃
Specifications:
1) in any material for PFFE treatment
2) good quality
3) 22 years reputation
PTFE Felt Features:
Material: PTFE fiber/PTFE long thread scrim
Weight: 630gsm-950gsm
Thickness: 0.81mm-1.12mm
Tensile strength (n/5 x 20cm):
a) Warp: 750 b) Weft: 980
Tensile elongation:
a) Warp: <25% b) Weft: <20%
Permeability (10-3m3/m2.S): 100 - 200
Working temperature:
a) Continuous: 240
b) Instant: 300
Surface treatment: singeing, heat setting,PTFEcoating,membrane.
PTFE material also called material,with a good performance in the
temperature of 240 centigrade,the instant temperature can up to 260
centigrade. PTFE is a special material with a good alkali and acid
resistance,non-hygroscopic,stable physical dimension, mainly used
in coal burning boiler,waste incineration,carbon black
producing,Tio2 producing for fume treatment or dust collection.
| Compositions | 100%PTFE | |
| Weight (g/m2) | 800 | |
| Thickness (mm) | 1.0～1.5 | |
| Air permeability(L/m2/S) | 1.8-3.6 | |
| Tensile strength(N/5×20cm) | Warp | ≥600 |
| Weft | ≥800 | |
| Tensile Elongation(％) | Warp | <12 |
| Weft | <15 | |
| Continous operating temperature (℃) | ≤250 | |
| Short time operating temperature(℃) | 280 | |
| Anti-acid | Excellent | |
| Anti-alkali | Excellent | |
| Anti-abrasion | Excellent | |
| The stability of water solution | Excellent | |
| Finishing treatment | Heat Set | |
Notices:
PTFE needle felt are produced from 100% PTFE fiber which has been punched in three-dimentional structure. They have excellent features such as excellent flexibility, molding capability, high tensile strength, creep resistance, high and low temperature resistance, corrosion resistance and anti-aging. 100% PTFE filter material can meet requirements in hostile environments of temperature fluctuating and acid & alkali in all PH range. The lifespan of PTFE filter material will be guaranteed for over 4 years as long as the temperature is controlled under the maximum operating temperature.
Applications:
Combustion Coal burning boiler
Waste incineration Carbon black producing
Tio2 producing for fume treatment or dust collection
PTFE fibers are supplied blended with glass fibers and P84 to produce FMS Series
Fiber Name
| ptfe fiber | ||
Weight(g/m2) | 750-800 | Thickness(mm) | 1.8-2.0 |
Air permeability (m3/m2/min) | 5-8 | Working temperature (Degree C) | 240-260 |
Width(m) | <2.2m | Surface treatment | Heat-set and singed one side |
Break strength(N/5cm) | Warp≥900 Weft≥1200 | Break elongation(%) | Warp≥35 Weft≥50 |
Resistance to acid | Excellent | Resistance to alkali | Excellent |
Resistance to hydrolysis | Excellent | Resistance to oxidation | Excellent |
| Fibre Types | Continuous operating temp* | Designation | Resistance to Hydrolysis | Resistance to Acids | Resistance to Alkalis | Resistance to Oxidation |
|---|---|---|---|---|---|---|
| Polypropylene | 90℃-95℃ | PP | excellent | excellent | excellent | restricted |
| Polyacrylnitrile homopolymer | 125℃-140℃ | AC | good | good | moderate | good |
| Polyester | 110℃-130℃ | PE | restricted | moderate | restricted | good |
| Polyphenylene sulfide | 190℃-200℃ | PPS | excellent | excellent | excellent | restricted |
| m-Aramide | 200℃-220℃ | NO | moderate | moderate | moderate | moderate |
| Polyimide | 240℃-260℃ | P84 | good | moderate | moderate | good |
| Polytetrafluorethylene | 250℃-280℃ | PTFE | excellent | excellent | excellent | excellent |
Hangzhou philis filter technology co.,ltd. has grown up to be one of leading manufacturer on dust filtration&spare parts in China.We have imported filter needle felt production line ASSELIN from France and we can produce very good quality non-woven products according customer's requirment.
Based on 8 needle felt production line ,our annual production ability can achieved 20,000 square meters per day . We can produce a large range of various filter fabric, such as polyester filter fabric, Acrylic filter fabric, Fiberglass filter fabric, PPS filter fabric, Aramid ,P84 ,PTFE ,woven filter fabric and so on.
The most important thing is that we introduced German high technology to develop the first filter bag production line in China. Which help most filter bag production factory save a lot of human lab our cost but promote the work effection . The advanced technology and simple operation way of automatic filter bag production line has won a lot of customer’s praise.
