|
[China]
Trade Verify
Address: 308 # T9 Build CHENJIN Noble Realm,No.1700 CaoYang Road, PuTuo Area ,Shanghai,China
Contact name:Yanni Wang
SHANGHAI CHONGYANG WATER TREATMENT EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
Product Name:EDI Water Filtration technology for medical
What are the most common maintenance requirements for hemodialysis water systems?
Membrane replacement: Reverse osmosis (RO) membranes in hemodialysis water systems may need to be replaced periodically to ensure that they are effectively removing impurities and microorganisms from the water. The frequency of membrane replacement will depend on the specific system and the quality of the feed water.
Calibration of monitoring equipment: Any monitoring equipment used in hemodialysis water systems, such as conductivity meters and pH meters, should be calibrated regularly to ensure accurate readings.
Record-keeping: Hemodialysis water systems should have a record-keeping system in place to document maintenance activities, filter and membrane replacement schedules, and water quality monitoring results.
Overall, regular maintenance of hemodialysis water systems is essential to ensure that they continue to produce high-quality water that meets the required quality standards for hemodialysis treatment. The specific maintenance requirements will depend on the type of system, the quality of the feed water, and the frequency of use.
The Parameter:
| Type & Spec. | CY-BYXT-II-500/1000/1500/2000/3000/4000L/H | |||||||||||
| The Raw Water Quality | Tap water ,TDS≤200ppm,Pressure 0.2～0.4Mpa,Water Temperature:5～40℃ | |||||||||||
| Supply Power | 380VAC,50HZ | Operation Pressure | 0.2-0.6Mpa | |||||||||
| Water Quality | Meet YY0572-2005,meet USA AAMi/ASAIO Standard of hemodialysis water ,removal rate of bacterial endotoxin ≥99%,No dead cavity. | |||||||||||
| Production Water Quantity | 500L/H | 1000L/H | 1500L/H | 2000L/H | 3000L/H | 4000L/H | ||||||
| Power | 2500VA | 3500VA | 5000VA | 7000VA | 10000VA | 15000VA | ||||||
| Inlet Diameter | DN 25 | DN 32 | DN 40 | DN 40 | DN 50 | DN 50 | ||||||
| Outlet Diameter | DN 20 | DN 25 | DN 25 | DN 32 | DN 32 | DN 40 | ||||||
| Suitable Beds | 5-10 | 10-20 | 20-30 | 30-40 | 40-60 | 60-80 | ||||||
| Size | 2000×750×1600mm | 2200×750×1600mm | 2500×850×1600mm | 3200×850×1600mm | ||||||||
| Weight | 580kg | 800kg | 980kg | 1100kg | 1500kg | 2000kg | ||||||
| Installation Area | 10㎡ | 15㎡ | 25㎡ | 35㎡ | 40㎡ | 55㎡ | ||||||
Note: 1. The temperature requirement of usage &installation is 5-40℃,Humidity ≤80%, There is no direct sunlight in the equipment room , The floor drain is set on the ground and the drainage is sooth .
2. The bearing capacity of room should meet installation of requirement .This product should avoid running in environment with strong electromagnetic interference .
FAQ:
1.Question:Can you customize various capacity for us ?
Answer:Yes. We can customize for you .
2. Question: What is the raw water quality ?
Answer: Tap water, Underground Water ,it is better to be water quality that under TDS 400 PPM.
3.Question:How to install the big project of water treatment equipment ?
Answer : CHONGYANG Provide turnkey projects .
4. Question: How long is the warranty period ?
Answer: 1 year.
5. Question:How to settle water equipment's faults ?
Answer :CHONGYANG WATER can provide remotely repair for software , Change new parts without fee for hardware if it is till during guarantee period .
