Hangzhou SED Pharmaceutical Machinery Co.,Ltd. |
Verified Suppliers
|
|
3kw Rotary Hard Powder 120000pcs/Hour Automatic Capsule Filling Machine
Products Description of Capsule Filling Machine
SED-2000J-C Automatic Capsule Filling Machine is commonly used in the pharmaceutical, nutraceutical industries to fill empty hard gelatin capsule of various sizes with powders and pellets (optional). The capsule filler automatically orientates, opens the empty hard gelatin capsule, properly fills the capsule with powder, and automatically closes the capsules.
Products Parameters of Capsule Filling Machine
Model | SED-2000J-C |
Machine Weight | 1500kg |
Overall Dimension | 1000×1050×1950mm |
Motor Power | 6.45KW |
Power Supply | AC380V 50Hz 3P4W |
Capacity | 120000 capsules/h |
Application | 00#-5# capsule, safety capsule A-E |
Qualified Rate | ≥99.5% |
Working Noise | ≤75dBA |
Filling Error | ≤±3% (filling more than 300mg of 40-80 mesh granules) |
Compressed Air | 0.06m3/min 0.3Mpa |
Water Source | Water ring vacuum pump with water tank or connected to external water source |
Water Flow | 250L/h |
Diameter of Water Inlet | 20mm |
Diameter of Drain Pipe | 27mm |
Vacuum Degree | -0.02~-0.06 MPa |
Exhaust Volume | 300m3/h |
Features of Capsule Filling Machine
1. The automatic capsule filling machine has beautiful appearance,
fine craftsmanship, simple operation and convenient use;
2. The filling seat and the metering disc are integrated, so that
the metering disc and the filling rod will not be offset, avoiding
the friction between the filling rod and the metering disc,
improving the filling accuracy and prolonging the service life;
3. The fully automatic capsule filling function can automatically
remove defective capsules, recover the drugs in defective capsules,
and reuse them to improve economic benefits;
4. The automatic capsule filling machine is simple and convenient
to disassemble and clean, and can exchange various types of molds,
and various molds can be exchanged and used on the same machine to
meet the requirements of different production capacities;
5. The vacuuming, vacuuming habits and exhaust pipe are designed
inside the body to avoid the phenomenon of hardening, breaking and
air leakage of the trachea, which is convenient for the work
surface to be clear and meets the requirements of GMP;
6. The filling rod nut is made of stainless steel instead of the original plastic nut to avoid cracking; the working table has fewer screws and nuts, which is easy to clean and makes the whole machine more beautiful.
Product Details