|
[China]
Trade Verify
Address: Room 401,Unit 1,Building 6,Kecheng Kechuang Yuan,No.1500 Wenyi Xi Road,Cangqian Street,Yuhang Area,Hangzhou City,Zhejiang Province,China
Contact name:Wei
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
Capsule Filling Manual Pharma Machinery With SED-JY7500 0.09m3/Min 380or 220v,3phase
Product Description of Capsule Filling Machine
This machine is full automatic for filling the hard empty capsule,auto load empty capsule,auto load powder,auto load granule.
We can offer you different capacity capsule filling machine for different function.
Detailed Parameters of Capsule Filling Machine
| Model | SED-7500 |
| Capacity ( capsule/min) | 7500 |
| Capsule Size | 00-5# |
| Power | 13.5kw |
| Machine Voltage | 380or 220v,3phase |
| Noise | below75BA |
| Air consume | 0.09m3/min |
| Machine weight | 3800kg |
| Machine size | 1700×1250×2150mm |
Trait of Capsule Filling Machine
Control system be provided with OPC server.
Control system be realized with FDA CFR211 E-signature E-recording.
Control system be provide with industrial Ethernet interface be connected with OPC client.
Working Principle of Capsule Filling Machine
The working principle of the automatic capsule filling machine is
divided into two parts, which are the movement of the capsule and
the filling of the medicine:
1. Movement of the capsule
During the filling process of the intermittent capsule filling
machine, the movement of the capsule depends on the indexing box
for intermittent and discontinuous rotation. The filling volume of
the capsule is mainly determined by the volume of the metering
disc hole. The hollow capsule is in the capsule hopper, the main board moves up and down, the capsule enters the capsule guide groove by its own gravity, and then the horizontal fork and the vertical plug make the capsule cap upward and the
capsule body downward into the upper and lower modules. The capsule
body and capsule cap are separated under the action of the device,
and then the module enters the powder filling station.
2. Drug filling
The sensor in the powder holding ring controls the screw feeding
rod above it, and the medicine is continuously added to make the
height of the powder in the powder holding ring constant. position,
push the drug column into the capsule body. After that, it
enters into the capsule rejection, capsule locking, finished capsule discharge, module cleaning station in turn, and then enters a new round of station cycle, and the cycle begins again and again.
Product Show of Capsule Filling Machine
Application of Capsule Filling Machine
