|
[China]
Trade Verify
Address: Room 401,Unit 1,Building 6,Kecheng Kechuang Yuan,No.1500 Wenyi Xi Road,Cangqian Street,Yuhang Area,Hangzhou City,Zhejiang Province,China
Contact name:Wei
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
Fully Auto Pill Capsule Making Machine With 3 Phase Power Supply
Product Description of Capsule Filling Machine
Our capsule-filling machine is used to encapsulate product (powder,
and pellets) in gelatin capsules. Empty capsules are loaded into
the capsule hopper where they are fed into the magazine. Capsules
initially enter the magazine un-oriented. From the magazine, the
capsules enter the sorting block where they are properly oriented
(smaller end on the bottom). The capsules are then separated by
vacuum. The lower portion of the capsule is filled. The upper
portion of the capsule is inspected to ensure the capsule is
separated. (If the capsule is not separated or is faulty, a pin
will dislodge the capsule and the vacuum will remove it from the
system.) The two halves are then joined together. The finished
capsule is discharged to a chute and the station is cleaned with an
air blast.
The capsule filler can use all makes of capsules (00#～5# and safety
capsule A～E). Non-separated or improperly inserted capsules will be
automatically rejected. Capsule target fill weight can be adjusted
by changing dosing disks. At the end of a run, only a small
quantity of product will be remaining in the hopper.
Technical Parameters
| Model | NJP-260 Fully automatic liquid capsule filler |
| Weight | 900kg |
| Dimensions | 1020×860×1970mm |
| Power | 5.75kw |
| Power supply | 3phase 4 wires AC 380V;50Hz |
| Maxi. Capacity | 260 capsules/m |
| Capsule specifications | 00#~5# and Safety Capsule A~E |
| Capsule feeding rate | ≥99.5% |
| noise | ≤75dBA |
| Filling precision | Liquid Above 300mg≤±3% |
| Compressed air | 0.06m3/min 0.3Mpa |
| Water | Recycling water |
| Vacuum degree | -0.02~-0.06 MPa |
| Water flow | 250L/h |
| Intake water diameter | 20mm |
| Discharge water diameter | 27mm |
| Work environmental temperature | 21℃±3℃ |
| Workshop’s height | Manual Feeding≥2.6m, Automatic Feeding≥2.8m |
| Related Humidity | 40~55% |
| Control system | PLC |
| Material | Stainless steel 304 and 316. |
Characteristic
1. This machine improves the internal design of mould rotary plate and adopts original Japan linear bearing, which can ensure its precision and service life.
2. It employs the cam underneath design and adds the pressure atomization oil pump, which can keep the cam groove lubricant, reduce wear and prolong the service life of accessories.
3. The upper and lower moulds of this machine carry out one-way movement. With employing the imported double-lip PU seal ring, it has very good sealing performance.
4. It adopts computer control, stepless frequency control of motor speed and digital display to make the operation more simple and intuitive.
5. It’s equipped with safety protection device for both operators and machine and auto-stop device for material lacking to make the machine run stably, safely and reliably, which is an ideal equipment for those pharmaceutical factories to produce hard capsules such as medicine or functional food.
6. This machine combines the mould blowing with sucking to ensure no dust in the mould hole and improve the rate of good finished capsules.
Product Details of Capsule Filling Machine
Application of Capsule Filling Machine
