|
[China]
Trade Verify
Address: Room 401,Unit 1,Building 6,Kecheng Kechuang Yuan,No.1500 Wenyi Xi Road,Cangqian Street,Yuhang Area,Hangzhou City,Zhejiang Province,China
Contact name:Wei
Hangzhou SED Pharmaceutical Machinery Co.,Ltd. |
|
Verified Suppliers
|
|
|
SED-200J Stainless Steel Small Capsule Filling Machine With Speed 200 Capsules Per Minute
Product Overview of Capsule filling machine
SED-120J Fully Automatic Capsule Filling Machine is used to fill powder, grain, tablet. It adopts multi-bore dosing, intermittent motion and timing frequency conversion.
It is suitable for automatically completing capsule feeding, separating, filling, (waste capsule rejecting),closing,finished product ejecting for powder or tiny pillmedicine in capsule. It is designed sophisticatedly by our factory according to the practice on domestic, fully accord with the GMP standard.
Machine Parameters of Capsule filling machine
| Model: | SED-200J |
| Capacity | 200capsules/minute |
| Manchine suitable for: | Capsule Size#00 to 5 |
| Power supply: | 380V 50Hz (it can be changed depend on your requirement) |
| Power consume: | 3.2kw |
| Noise standard: | ≤75dB(A) |
| Weight: | 900kgs |
| Overail dimension: | 600*800*1750mm |
Main Feature of Capsule filling machine
1. It has been improved the inner design turret, and imports beeline bearings for each machine from Japan directly, so that it can be sure a longer usage-life and precision of machine.
2. The working station cam runs under the good lubricating
condition, and maintains the inner lubrication of cam slot to a
full extent, increasing the pressure pulverization oil pump, thus
extends the operation life of the spare parts.
3. It is controlled by the computer, has a stepless timing with the
frequency-conversion, the numeral showing makes an easy operation
and clear appearance.
Working Principle of Capsule filling machine
The working principle of the automatic capsule filling machine is divided into two parts, which are the movement of the capsule and the filling of the medicine:
1. Movement of the capsule
During the filling process of the intermittent capsule filling
machine, the movement of the capsule depends on the indexing box
for intermittent and discontinuous rotation. The filling volume of
the capsule is mainly determined by the volume of the metering
disc hole.
The hollow capsule is in the capsule hopper, the main board moves up and down, the capsule enters the capsule guide groove by its own gravity, and then the horizontal fork and the vertical plug are used to make the capsule cap upward and the capsule body downward into the upper and lower modules. The capsule body and capsule cap are separated under the action of the device, and then the module enters the powder filling station.
2. Drug filling
The sensor in the powder holding ring controls the screw feeding
rod above it, and the medicine is continuously added to make the
height of the powder in the powder holding ring constant. position,
push the drug column into the capsule body.
After that, it enters into the capsule rejection, capsule locking, finished capsule discharge, module cleaning station in turn, and then enters a new round of station cycle, and the cycle begins again and again.
Product Show of Capsule filling machine
Application of Capsule filling machine
The automatic capsule filling machine is mainly used for filling powder or pellet capsule medicines in medicine, hospital preparation room, health care products and other industries.
